Használati útmutató Hager JKD2884TM

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Hager JKD2884TM (2 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 13 ember találta hasznosnak.

/ 2 PDF

Pozidrive PZ24.5mm

All product(s) must be installed by a suitably competent electrician

giving consideration to their intended use and in accordance with the

current edition of BS 7671 (IET Wiring Regulations).

The Electricity at Work regulations and the Health and Safety at Work

Act shall be complied with.

Only equipment and arrangements specied in Hager’s technical

documentation / catalogue shall be used

Install in the vertical plane only.

Notice:

To prevent potential overheating from loose connections the installer

shall check connections are tightened to the torque levels stated in

these instructions prior to energising this board. This check should

include factory made connections which may have loosened in transit.

JKD2884 MTNotice d’instructions

User instructions

Bedienungsanleitung

Instrucciones de uso

Instruções

Bruksanvisning

Gebruiksaanwijzing

Pozidrive PZ2

2.5

DesignationHW D

JKD2884M1 50mmT5465mm 165.5mm

Warranty

This distribution board is offered with a 24 month warranty against

defective material or manufacture. If a warranty claim is necessary,

please call the technical support number given at the bottom of the page

and we will be pleased to help.

Interface Characteristics

Rated & operational voltage (U

n / Ue)

415V a.c. 50Hz

Rated insulation voltage (U

i)

690V a.c. 50Hz

Rated impulse withstand voltage (U

imp)

4kV

Rated current of the Assembly (I

nA)

JKD2884M 200AT

Rated current of an Outgoing circuit (InC)

MCB 0.5A - A (marked rated current on device)50

MCB 63A = 56.7A (derating to 0.9)

RCBO 6A - 40A (marked rated current on device)

Rated Current of Pan Assembly

Upper Pan Inc = 125A

Middle Pan In = 2Ac00

Lower Pan Inc = 2A00

Rated conditional short-circuit current of the ASSEMBLY (I

cc)

10kA

1 with equipment and arrangements specied in Hager’s technical

documentation / catalogue.

MCB/RCBO 10kA rating applied as BS EN 61439-3 is intended for use

by ordinary persons.

1

Current limitation characteristics specied in Hager’s technical

documentation / catalogue

Protection against electric shock

DBO shall be installed in an electrical system conforming to IEC 60364 /

BS 7671

Rated diversity factor (RDF)

10 way - 24 way = 0.6

Note: RDF only applies to continuously and simultaneously loaded

circuits.

Rated frequency (fn)

50 Hz

Pollution degree

2

Types of system earthing for which the ASSEMBLY is designed

TNC-S, TN-S and TT when installed in an electrical system conforming

to BS 7671

Intended locations

Indoor use only

Stationary ASSEMBLY

Degree of protection

IP3XD with Door Closed

IP2XC with Door Open and compliment of outgoing devices and or

blanks tted.

Intended use

Distribution boards intended to be operated by ordinary persons (DBO)

Electromagnetic compatibility (EMC) classification

EMC Environment B

External design

Wall-mounted, surface type, enclosed assembly.

Mechanical impact protection

IK05

The type of construction

Fixed parts

DBO Type

Type B DBO

Accessories

JK01BSingle Pole Blank

JK222PKJK1 / JK2 Door Lock Kit

JK2PLATEMGland Plate + Drill Markings

Hager Technical Help Line: 01952 675 689

Hager Technical Fax: 01952 675 557

Website: www.hager.co.uk

E-mail us: info@hager.co.uk

Twitter: @hageruk

GB

ZD0902ZD0902 14

ZD0902ZD0

Invicta 3

JK201SPDType 1 & 2 Surge Protection Kit

JK202SPDType 2 Surge Protection Kit

Termékspecifikációk