Használati útmutató Hager VM11214SPD

Hager kapcsoló VM11214SPD

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Hager VM11214SPD (3 oldal) a kapcsoló kategóriában. Ezt az útmutatót 15 ember találta hasznosnak és 8 felhasználó értékelte átlagosan 5.0 csillagra

Oldal 1/3
Hager Ltd. Hortonwood 50, Hortonwood, Telford, TF1 7FT / 01952 675 675 1
Consumer nit U
Design 30 Switch
Disconnector Incomer
with SPD
For the distribution of power in a residential
application, conforming to BS EN 61439-3
including Annex ZB (16kA rating).
Design 30 is the enhanced board for use in applications where the
consumer unit is located in a living area of the dwelling.
The range of consumer units with a 100A rated current (InA) have
been designed for installations where the upstream overcurrent
protection device (OCPD) is rated at 100A or below.
Design 0 consumer unit is an ntry level board esigned or all 1 e d f
applications and allows compliance with S 7671:2018; B
Regulation 21.1.201 within domestics (household) applications consumer 4
units and similar assemblies shall comply with S EN 61439-3 and hall B s
have their enclosure manufactured rom a on-combustible material. f n
Regulation 11.3.3 additional protection y means of a 0mA RCD s 4 b 3 i
provided y RCBOs. b
Regulation 14.1&2 segregation f circuits to avoid anger and minimise 3 o d
inconvenience in he event of a ault. t f
Regulation 22.6.202 protection f wiring concealed n walls or partitions. 5 o i
Regulation 31.3.3 Selection f appropriate RCD. Type A CBOs can 5 o R
d t petect and respond o both AC and ulsating DC components.
Regulation 36.4.3.2 & 36.4.202 overload protection f switches and 5 5 o
R iCCBs. For installations where the upstream overcurrent protection s less
than r equal to 100 A. o
Regulation 443.4 Protection st transient over voltages, provided by again
factory fitted type 2 SPD.
Description
Size Cat ref.
Cat ref.
with Knockouts
8 Way 100A Switch Disconnector Incomer with Factory Fitted SPD 4 VM108SPD VM108KSPD
12 Way 100A Switch Disconnector Incomer with Factory Fitted SPD 5 VM112SPD VM112KSPD
18 Way 100A Switch Disconnector Incomer with Factory Fitted SPD 7 VM118SPD VM118KSPD
8 + 10 Way Dual Row 100A Switch Disconnector Incomer with Factory Fitted SPD 4(2) VM10810SPD VM10810KSPD
12 +14 Way Dual Row 100A Switch Disconnector Incomer with Factory Fitted SPD 5(2) VM11214SPD VM11214KSPD
16 + 20 Way Dual Row 100A Switch Disconnector Incomer with Factory Fitted SPD 7(2) VM11820SPD VM11820KSPD
VM108SPD
Features & Benefits
- Cable clamp - Secures supply cables on entry to main incoming
device preventing any movement being transmitted through metertails
to device
- Square cable entry points top and bottom for use with cable trunking
(references available with or without knockouts)
- Rear Knockouts for ease of cable entry – Cable protector plate
provided
- Rigid top wall – Enhances rigidity to prevent distortion when removing
knockouts
- Locate and hold cover - allows use of both hands whilst xing cover
- Front cover retained screws – Prevents loss during installation
- Full metal DIN railSecure and stable attachment of devices
- Quick release clip on MCB/RCBO – Allows removal of MCB/RCBO
with busbar still in place
- Optimised cabling space DIN rail position allows maximum cabling
space
- Top mounted terminal rail makes the wiring of the neutral and earth
connections neat and simple.
- Health and Safety lock allows the door to be secured with circuits
isolated during construction (via accessory, see overleaf).
- Torque settings displayed inside front cover so they’re easily
accessible by the electrician.
- Lockable front door via an accessory (see overleaf).
Fa fitte type surge protectionctory d 2
-
Design 0 3
Switch isconnector ncomer onsumer nit D I C U with SPD

Termékspecifikációk

Márka: Hager
Kategória: kapcsoló
Modell: VM11214SPD

Szüksége van segítségre?

Ha segítségre van szüksége Hager VM11214SPD, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek