Használati útmutató Havis C-VS-0809-CHGR-1

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Havis C-VS-0809-CHGR-1 (4 oldal) a Autós készlet kategóriában. Ezt az útmutatót 14 ember találta hasznosnak és 6 felhasználó értékelte átlagosan 4.6 csillagra

C-VS-0809-CHGR-1_INST_4-11

C-VS-0809-CHGR-1

(Assembly)

INSTALL INSTRUCTIONS C-VS-0809-CHGR-1

2011-2013 Dodge Charger (Police Package)

VEHICLE SPECIFIC CONSOLE

With 17” inches Equipment space

TOOLS NEEDED:

Phillips Screw Driver

Socket set (Standard & Metric)

Wire Cutters Wire Crimping tool

7/16 wrench T-20 Torx Bit

QTY DESCRIPTION PART #

1 Main Console Housing CM004345

CM004345 Main Housing Includes:

1 Floor Mount Bracket CM003956

1 Front / Center End Panel CM004380

1 Lighter Socket with cap CM216560

3 7/8” Plug CM86430

1 “O” Ring KRM98017

Not Included with CM00435 Housing, but included with complete kit:

1 Driver Side Trim Panel CM004381

1 Passenger Side Trim Panel CM004382

1 Lighter Socket with cap CM216560

1 Sensor Cover CM001638

1 Hardware kit C-HK-174

CM004380

Front / Center End Panel

CM004345

Main Console Housing

CM004381

Driver Side Trim Panel

CM003956

Floor Mount Bracket

ALWAYS!

* Read all Instructions before installing any Havis, Inc. products.

* Use Hardware included with install kit

CM004382

Passenger Side Trim Panel

NOTE:

If your vehicle has the optional carpet interior, there will be a small

hole in the carpet not covered by the console housing at the rear.

If desired, an optional cover plate part number - CM001642 is available.

Cover plate not shown.

Termékspecifikációk