Használati útmutató Hecate GT2

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Hecate GT2 (3 oldal) a fejhallgató kategóriában. Ezt az útmutatót 13 ember találta hasznosnak és 7 felhasználó értékelte átlagosan 4.3 csillagra

Oldal 1/3
EN Product description and accessories
TRUE WIRELESS GAMING EARBUDS
Quick󶀅Sta󶀅Guide
Operating instructions
Model: EDF700056
Edier International Limited
P.O. Box 6264
General Post Oce
Hong Kong
www.edier.com
©2024 Edier International Limited. All rights reseed.
Printed in China
www.hecategaming.com
Designed by DONGGUAN EDIFIER ESPORTS TECHNOLOGY CO., LTD.
NOTICE:
For the need of technical improvement and system upgrade, information contained herein may be
subject to change from time to time without prior notice.
Products of EDIFIER will be customized for dierent applications. Pictures and illustrations shown
on this manual may be slightly dierent from actual product. If any dierence is found, the actual
product prevails.
For more information, please visit our website:
Earbuds
L R
Touch panel
Microphone
Touch panel
Microphone
Charging cable
Quick sta guide Brand card Brand sticker
Note:
• Images are for illustrative purposes only and may dier from the actual product.
• For the need of technical improvement and system upgrade, information and specications contained
herein may be slightly dierent from actual product. If any dierence is found, the actual product prevails.
Charging case
Indicator
•Power on
3s
•Power o
5s
L
R
Power on
Take out the earbuds, or press and hold the touch panel for 3s.
Power o
Place the earbuds in the charging case, or press and hold the touch
panel for 5s.
Batte level status
0%~33%
33%~67%
67%~100%
Low batte
Indicator at the bottom is steady lit;
Indicators at the top and in the middle are o.
Indicator at the bottom blinks rapidly.
Three indicators are steady lit.
Indicators at the bottom and in the middle are steady lit;
Indicator at the top is o.
1. When powered on for the rst time, the earbuds will auto-enter Bluetooth pairing state (prompt: "Bluetooth
Pairing").
2. Select "HECATE GT2" in your device setting to connect. You will hear the prompt "Bluetooth Connected"
when successful.
3. For a device paired successfully before, the earbuds will reconnect to it automatically. If not, the eabuds will
auto-enter the pairing state in 3 seconds.
Connection method
• Bluetooth
1. Place the earbuds in the case for charging.
2. After the batte level indicator on the case is lit, the lightbar will
blink slowly:
Indicator at the bottom blinking slowly = charging (Left earbud)
Indicator at the top blinking slowly = charging (Right earbud)
Indicators o = fully charged
Charge
• Earbuds
Indicator at the
top
Indicator at the
bottom
Ice blue/purple indicator blinking slowly = charging; Indicator steady lit for 3s and then o = fully charged;
It takes around 2 hours for a full charge.
• Charging case
33%~67%
Indicator at the bottom is steady lit;
Indicator in the middle blinks slowly.
Indicator at the bottom blinks slowly.
Indicators at the bottom and in the middle are steady lit;
Indicator at the top blinks slowly.
0%~33%
67%~100%
Controls
L R
Touch panelTouch panel
Accept/end a call
X2
Reject a call
2s
X2
Play/pause
2s
Previous track(Left earbud)
Enable voice assistant
(Left earbud)
X3
Switch game/music mode
(Right earbud)
X3
2s
Next track(Right earbud)

Termékspecifikációk

Márka: Hecate
Kategória: fejhallgató
Modell: GT2

Szüksége van segítségre?

Ha segítségre van szüksége Hecate GT2, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek