Használati útmutató HELGI HLG0388SDI

Olvassa el alább 📖 a magyar nyelvű használati útmutatót HELGI HLG0388SDI (4 oldal) a AV hosszabbító kategóriában. Ezt az útmutatót 18 ember találta hasznosnak és 8 felhasználó értékelte átlagosan 4.5 csillagra

SDI CableTV

Connection instruction:

1). Connect SDI input with SDI source device and connect IR blaster

extension cable with IR OUT interface of the sender (TX).

2). Connect SDI output with SDI display device and connect IR

receiver extension cable with IR IN interface.

3). Power on the device (power led lights) and it works.

Note:

1） When the wireless signal transmits through wall, glass or other

obstacles, it will cause signal loss. Suggest installing this device in

good environment with few obstacles.

2） The external environment wireless signal interfere the transmission,

such as micro waver, wireless mouse and keyboard etc.

Specification

SDI signalSDSDI HDSDI 3GSDI- ,- ,-

Support resolution

SD-SDI 480i： @60Hz 576i， @50Hz

HD-SDI 720p： @50/60Hz 1080i， @50/60Hz,1080p@24/25/30Hz

3G-SDI 1080p： @50/60Hz

Transmit distance200m

IR remote controlSupport 20~60kHz wide frequency IR remote device

Working temperature0℃ 60℃～

Power supplyDC5V/3A *2PCS

Power consumptionTX: 13W; RX: 11W

Product dimension

Weight

Color

195.5(W) x 138.5(D) x 32(H)mm *2PCS

Items

Black

TX: 575g RX:575g

Enclosure materialMetal

Transport protocolHDbitT

•Connection

SDI Extender

TX sender

SDI Extender

RX receiver

•FAQ

Q:TV display “waiting for connection” on the bottom right corner?

A:Please check if the power supply of TX (sender) and RX(receiver) is well

connected and the power indicator led lights on.

Q:TV display “Please check the TX input signal”?

A:1) please check if there is an SDI signal input of sender TX

2) Try to connect the signal source directly to display device to see if there

is signal output from source device or change the signal source, SDI

cables and try again.

Q:Display not fluent and stable?

A:1) Please move the position of sender (TX) and receiver (RX) and make sure

the device is within the required scope of the signal.

2)Press“reset” button on the RX/RX panel, reset and reconnect.

3)Remove other wireless signal disturbance and reduce the obstacles on

the way.

•Specification

The product name and brand name may be registered trademark of related

manufacturers.TM and ® may be omitted on the user manual. The pictures

on the user manual are just for reference,and there may be some slight

difference with the real products.

We reserve the rights to make changes without further notice to a product

or system described herein to improve reliability, function or design.

Disclaimer

SDI Cable

HD CAMERA

SDIWireless Transmitter 200m

User manual

Termékspecifikációk