Használati útmutató Hitachi PDADJ

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Hitachi PDADJ (5 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 11 ember találta hasznosnak és 6 felhasználó értékelte átlagosan 4.2 csillagra

Page 1 of 5

Mounting Instructions

HITACHI PDADJ PLASMA MOUNT

For sizes 32”, 37”, 42” & 50”

1. Please read your plasma screen instruction manual prior to installation of

this product, carefully noting safety concerns regarding installation

location.

2. Always have 2 people working on the installation

3. Care must be taken, that the wall to be used, is of sufficient strength. Only

fix to solid timber studs, or to brickwork

4. Install wall plate (Part 1) in required position, using heavy duty screws or

concrete anchors. Pay particular attention to keep the plate level.

5. Install cabling, according to your manufacturer’s instructions.

6. Loosen angle adjusting nuts, and pull pivots forward. (see fig 1)

7. Remove the 6mm retaining screws (see fig 2) and lift off parts 3 (see fig 3)

and fix to the back of the TV panel using bolts provided (see fig 4)

8. Employing 2 people, lift the TV panel, and hook onto the pivot brackets.

9. Refit the two 6mm retaining screws into pivot brackets (parts 2& 3)

10. Tilt panel to desired viewing angle (from 0° - 20°) and tighten locknuts

(see fig 1)

11. Finalise all electrical connections.

Termékspecifikációk