Használati útmutató Hobart FP350
Hobart
Konyhai robotgép
FP350
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Hobart FP350 (12 oldal) a Konyhai robotgép kategóriában. Ezt az útmutatót 11 ember találta hasznosnak és 6 felhasználó értékelte átlagosan 4.5 csillagra
Oldal 1/12
701 S. RIDGE AVENUE
TROY, OHIO 45374-0001
937 332-3000
www.hobartcorp.com F-19353 Rev. E (August 2008)
FP350 FOOD PROCESSOR
MODEL FP350 ML-104586
– 2 –
© HOBART, 2008
TABLE OF CONTENTS
GENERAL ..............................................................................................................................................................3
INSTALLATION ......................................................................................................................................................3
Unpacking ........................................................................................................................................................3
Location ...........................................................................................................................................................3
Electrical Connections .....................................................................................................................................3
OPERATION ...........................................................................................................................................................5
Controls (Fig. 1) ...............................................................................................................................................5
Fitting and Removing the Pusher Plate ...........................................................................................................5
Fitting and Removing the Cutting Tools ...........................................................................................................6
Using the Feed Cylinder ..................................................................................................................................7
Using the Feed Tube ........................................................................................................................................7
CLEANING .............................................................................................................................................................8
Cutting Tool Guide............................................................................................................................................9
MAINTENANCE ...................................................................................................................................................11
Replacement Dicing Grids .............................................................................................................................11
TROUBLESHOOTING .........................................................................................................................................12
Service ...........................................................................................................................................................12
– 3 –
Installation, Operation and Care of
MODEL FP350 FOOD PROCESSOR
SAVE THESE INSTRUCTIONS
GENERAL
The FP350 Food Processor is used for slicing, shredding, grating, Julienne cutting and dicing vegetables,
fruits, or cheese. A worktable, a wall rack, and a wide range of slicer, shredder, and dicing plates are
available options.
INSTALLATION
UNPACKING
Immediately after unpacking the FP350, check for possible shipping damage. If the Food Processor is
found to be damaged, save the packaging material and contact the carrier within 15 days of delivery.
Prior to installation, verify that the electrical service agrees with the specifi cations on the data plate located
at the rear of the machine.
Do not lift the food processor with any hinged or extended parts; lift only with one hand on the front carrying
handle and the other hand on the rear carrying handle (Fig. 1).
LOCATION
The FP350 should be operated on a suitable counter height surface. A pan (not provided), suitable for
kitchen use, can be used to capture the product at the exit chute.
ELECTRICAL CONNECTIONS
The electrical cord on this machine is equipped with a grounding- type plug which
must be connected to a properly grounded receptacle. If the receptacle is not the proper grounding
type, contact an electrician. Do not remove the grounding prong from the plug.
ELECTRICAL DATA
Model Volts Hertz Phase Amps
FP350 120 60 1 10
Termékspecifikációk
| Márka: | Hobart |
| Kategória: | Konyhai robotgép |
| Modell: | FP350 |
Szüksége van segítségre?
Ha segítségre van szüksége Hobart FP350, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók Konyhai robotgép Hobart
21 Augusztus 2024
21 Augusztus 2024
21 Augusztus 2024
21 Augusztus 2024
21 Augusztus 2024
21 Augusztus 2024
21 Augusztus 2024
21 Augusztus 2024
21 Augusztus 2024
21 Augusztus 2024
Útmutatók Konyhai robotgép
- Konyhai robotgép Witt
- Konyhai robotgép Brabantia
- Konyhai robotgép Brentwood
- Konyhai robotgép Comfee
- Konyhai robotgép Major
- Konyhai robotgép Weasy
- Konyhai robotgép Moulinex
- Konyhai robotgép Clatronic
- Konyhai robotgép Mesko
- Konyhai robotgép Inventum
- Konyhai robotgép Huslog
- Konyhai robotgép Imarflex
- Konyhai robotgép Santos
- Konyhai robotgép Panasonic
- Konyhai robotgép NutriBullet
Legújabb útmutatók Konyhai robotgép
4 Április 2025
31 Március 2025
30 Március 2025
30 Március 2025
30 Március 2025
27 Március 2025
27 Március 2025
15 Január 2025
15 Január 2025
15 Január 2025