Használati útmutató Holosun P.ID HC

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Holosun P.ID HC (2 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 7 ember találta hasznosnak és 4 felhasználó értékelte átlagosan 4.7 csillagra

Oldal 1/2
1. Battery Installation
1) Remove the bezel/battery cap by unscrewing it in a CCW direction.
2) Inspect the battery compartment for dirt, moisture, or corrosion, and
then clean the battery compartment if needed.
3) Inspect the O-ring seal on the battery cap to make sure that it is free of
sand and dirt particles and that it has not been damaged.
4) Install the battery as marked on the housing, see positive (+) end first (
Fig. 2 Then replace the bezel/battery cap by screwing it in a CW )
.
Caution:
When using for the first time, be sure to remove the battery insulation
material.
1) High Power White LED
2) Rechargeable Flat Top 18350 Battery
3) Magnetic Charging Port
4) CNC Milled 7075 Aluminum Housing
5) IP68 Waterproof
6) Rail Interface Adapter
www.holosun.com
User's Manual
WEAPONLIGHT
P.ID 23k Candela
P.ID-HC 42k Candela
System Description
Objective Lens
Features
Battery
Thank you for purchasing the P.ID / P.ID-HC from HOLOSUN. The P.ID
series of weapon lights are compact, yet powerful pistol mounted white
lights that are designed for Positive IDentification of threats in low or no
light conditions. The P.ID attaches to any firearm that uses a MIL-STD
1913 Picatinny rail and includes adapters for universal compatibility.
Before operation, please read the User's Manual carefully:
2. Battery Recharging
1) The recharging voltage is DC5V.
2) Connect the USB end of the charging cable to an external USB power
source, then attach the other end of the magnetic charging cable to the
charging port of the light. (See Fig 3).
I. Red indicator light: charging
ii. Green indicator light: fully charged
Caution:
Do not connect the charger if there is no battery installed.
Do not use attempt to charge a disposable battery
Please keep the charging port clean, wipe any dust off before charging.
The light can only be charged with the included magnetic charging cable.
The P.ID is not compatible with other MCC cables.
Fig 2
The P.ID / P.ID-HC includes a flat top 18350 Li-ion battery which
requires use of the included charging cable or a high quality
charger only. Frequently inspect the condition of the battery,
including the terminals and outer shrink wrap. Do not use a
battery that has any signs of damage, doing so risks injury.
Installation
1 2
1. Ensure the firearm is unloaded and safe by removing all ammunition
and magazines from the firearm and verify an empty chamber before
installation or battery replacement.
DO NOT ATTEMPT TO INSTALL THIS PRODUCT ON A LOADED
FIREARM.
2. Please keep the packaging should you need to make a warranty claim.
Important Notices
1. Component Description
1
2
3
5
6
7
8
4
Fig 1
1 Bezel 5 Locking Screw
2 Body 6 Activation Buttons
3 Adapter Insert 7 Charging Indicator
4 Clamping Block 8 Magnetic Charging Port
2. Packaging
The P.ID packaging includes the following items:
1) P.ID Tactical White Light 4) User manual
2) 3 Rail Interface Adapter Inserts 5) T10 Torx Tool
3) USB Magnetic 6) Flat Top 18350 Battery Charging Cable
Battery Cap / Bezel
Battery
Compartment
Battery
O -Ring
Indicator
Magnetic Charging
Port
Fig 3
1. Installation on an accessory rail
1) Using the included tool, loosen the clamp block in order to install the
P.ID onto the rail.
2) Press the head of the clamp screw to open up the rail clamp to it’s
maximum width.

Termékspecifikációk

Márka: Holosun
Kategória: nincs kategorizálva
Modell: P.ID HC

Szüksége van segítségre?

Ha segítségre van szüksége Holosun P.ID HC, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek