Használati útmutató Honeywell 3511

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Honeywell 3511 (8 oldal) a Boltozat kategóriában. Ezt az útmutatót 7 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/8
Model 3511
EXECUTIVE / LONG GUN SAFE
Read this manual carefully and never store it inside the safe!
1
Model 3511
EXECUTIVE / LONG GUN SAFE
PACKAGE CONTENTS
1 – Executive / Long Gun Safe
1 – Operation Manual
2 – Override Access Keys
2 – - Storage Box Keys
4 – “AA” Batteries
1 – Mounting Kit w/ Bolts
ATTENTION
DO NOT RETURN SAFE TO STORE!
For missing parts or difficulty operating your safe, please contact our Consumer Assistance
Department by telephone.
Store will not accept returned products without prior authorization. You must first contact our
consumer assistance department.
US/Canada 1- - - 877 354 5457 (Toll Free)
Mexico 01- - - 800 288 2872 After English voice recording stops you must then enter 800- -860 1677
to complete your call. (Toll Free)
Australia 0011 800 5325 7000 - - - (Toll Free)
Germany/New Zealand 00 800 5325 7000 - - - (Toll Free)
Other Countries XX*- - - 310 323 5722
- XX* Dial U.S. Country Code first (Toll Charges Apply)
DIGITAL LOCK OVERVIEW
A - Lock Knob
B - Override Key Cover
C - Green LED
D - Red LED
E - Yellow LED
F - Entry Lever Handle
G - Reset Button
H - Battery Compartment
2
SETUP
1. Remove override key cover with small screwdriver.
2. Insert override key and turn left to unlock safe.
3. Turn knob to right (clockwise) and unlock safe
4. Turn lever to right (counter clockwise) to disengage the bolts
and open door.
STEP 2. INSTALL BATTERIES
1. Remove battery compartment (A) cover on inside door. Insert 4
“AA” batteries (included). Ensure the batteries are installed in
the correct direction, with regard to polarity (+ and -).
2. Replace the battery cover.
3. Do not close door before testing digital lock.
STEP 3. TEST DIGITAL LOCK
1. With door open, turn knob left to put locking door bolts in lock
position.
2. Remove override key and store in a secure place.
NEVER STORE KEYS INSIDE SAFE!
3. Enter the preset pass code: “1”- -“B”. “5” “9”
4. Turn knob to right within 5 seconds.
5. Lock bolts should recede into the unlocked position .
STEP 4. PROGRAM A NEW PASSCODE
1. With door open, press reset button (C) inside door.
2. Yellow light is on, enter new pass code in 30 seconds.
3. Enter new code (3 to 8 digits) followed by “A” or “B”.
4. Safe will beep and yellow light will turn off. Lock bolts should
recede into the unlocked position.
OPERATION
TO OPEN THE SAFE
1. unlock and To open safe, enter the pass code
followed by “A” or “B”.
2. Turn knob to right (clockwise) and unlock safe.
3. Turn lever to right (counter clockwise) to
disengage the bolts and open .
TO CLOSE THE SAFE
1 . Close the door and hold it in the closed position.
2 . Turn lever to left (clockwise) to engage the bolts
and secure door.
3. Turn knob to the left (counter clockwise) and lock
safe.

Termékspecifikációk

Márka: Honeywell
Kategória: Boltozat
Modell: 3511

Szüksége van segítségre?

Ha segítségre van szüksége Honeywell 3511, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók Boltozat Honeywell

Honeywell

Honeywell 5005P Útmutató

30 December 2025
Honeywell

Honeywell 1533 Útmutató

31 Augusztus 2024
Honeywell

Honeywell 5605W Útmutató

29 Augusztus 2024
Honeywell

Honeywell 5605 Útmutató

29 Augusztus 2024
Honeywell

Honeywell 5605B Útmutató

29 Augusztus 2024
Honeywell

Honeywell 5605P Útmutató

29 Augusztus 2024
Honeywell

Honeywell 1553 Útmutató

28 Augusztus 2024
Honeywell

Honeywell 5705 Útmutató

26 Augusztus 2024
Honeywell

Honeywell 5912 Útmutató

26 Augusztus 2024
Honeywell

Honeywell 1106W Útmutató

26 Augusztus 2024

Útmutatók Boltozat

Legújabb útmutatók Boltozat