Használati útmutató Honeywell CT51

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Honeywell CT51 (16 oldal) a Termosztát kategóriában. Ezt az útmutatót 17 ember találta hasznosnak és 9 felhasználó értékelte átlagosan 4.4 csillagra

Oldal 1/16
CT51 Series
Thermostat
Getting started
Before you begin, make sure you have:
No. 2 Phillips & small pocket screwdrivers
• Hammer
Level (optional)
• Pencil
Drill and bit (3/16 for drywall, 7/32” for plaster)
® U.S. Registered Trademark. Patents pending.
Copyright © 2006 Honeywell International Inc.
All rights reserved.
Owner’s Manual
English: Page 1
Mode d’emploi
Français: Page 6
Manual de Uso
Español:gina 11
Check package contents:
• Thermostat
Wall anchors & screws (2 each)
Wire labels
Remove your old thermostat
TURN OFF POWER at heating/cooling system (or fuse/circuit-breaker panel).
Remove cover and thermostat, but leave wallplate with wires attached.
Old thermostat
Leave wallplate in place Is there a sealed tube containing mercury?
If so, see mercury notice below.
Cover
MERCURY NOTICE: If your old thermostat contains mercury, contact your local waste
management authority for proper disposal instructions.
These models provide control of 24 Vac heating & cooling systems:
Vertical Mount: Horizontal Mount:CT51N CT55N

Termékspecifikációk

Márka: Honeywell
Kategória: Termosztát
Modell: CT51

Szüksége van segítségre?

Ha segítségre van szüksége Honeywell CT51, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek