Használati útmutató Hooker 1618-75710-DKW

Hooker szék 1618-75710-DKW

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Hooker 1618-75710-DKW (2 oldal) a szék kategóriában. Ezt az útmutatót 14 ember találta hasznosnak és 7.5 felhasználó értékelte átlagosan 4.8 csillagra

Oldal 1/2
1/2
ASSEMBLY INSTRUCTION
Item#:1618-75710-DKW Deconstructed Upholstered Side Chair
** Please make sure you have all parts indicated below prior to assembly.
Assembly Steps:
There are two K/D chairs in one box. Please follow numbers on one chair and letters on the other chair
during assembly.
1. Place chair back on a clean surface.
2. Insert front leg and back leg into corner block of seat frame (I) by using 2bolt (A), 2lock washer (B)
and 2flat washer (C) , Tighten all bolts by allen wrench (D) (see diagram1).
3. Attach the back rail on the seat frame back by by using 1bolt (A), 1lock washer (B) and 1flat
washer (C) , Tighten the bolts by allen wrench (D)
4. After all bolts are attached and hand tightened, turn the chair upright.
5. Level the chair following the “chair leveling instruction” as below.
6. Make sure the chair is level and then tighten all bolts completely by using allen wrench (D).
Diagram 1
I

Termékspecifikációk

Márka: Hooker
Kategória: szék
Modell: 1618-75710-DKW

Szüksége van segítségre?

Ha segítségre van szüksége Hooker 1618-75710-DKW, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek