Használati útmutató Hooker 366-75-218

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Hooker 366-75-218 (1 oldal) a Táblázat kategóriában. Ezt az útmutatót 18 ember találta hasznosnak és 3 felhasználó értékelte átlagosan 4.2 csillagra

ASSEMBLY INSTRUCTION

Item#: 366-75-218 ROUND TOP LEAF PED TABLE W/2-10” LEAVES

** Please make sure you have allparts indicated belowprior to assembly.

Diagram 1Diagram 2Diagram 3

Assembly Steps:

1. Alignlocator dowels at thetable post top tothe holes in themending bridge panel, attach them

using 2 bolts(E), 2 lock washers(B), 2 flat washers(A), by turning with allen wrench(D) in a

clockwise direction. (see diagram 1).

2.Align locator dowelsatthebottomof tablepostto holesinbase, attachthemusing2bolts(E), 2

lock washers(B), 2 flat washers(A), by turning with allen wrench(D) in a clockwise direction.

(see diagram 2).

3. Put table top upside down on a soft surface to prevent from scratching top, attach the

assembled base to top using 4 bolts(E), 4 lock washers(B), 4 flat washers(A), by turningwith

allen wrench(D) in a clockwise direction. (see diagram 3).

4. Turn table upright, lift up the drop down leaf on each side and pull out the support lid under it

for supporting.

Caution: Do not over tighten.

Cleaning Instruction: Clean finishedparts with a damp cloth using amild dishwashingliquid and water solution.

Polish the finish withsoft cloth and an industry recognized furniture polish.

Termékspecifikációk