Használati útmutató Hooker 638-75006

Hooker szék 638-75006

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Hooker 638-75006 (2 oldal) a szék kategóriában. Ezt az útmutatót 11 ember találta hasznosnak és 6 felhasználó értékelte átlagosan 4.4 csillagra

Oldal 1/2
1/2
ASSEMBLY INSTRUCTION
Item#:638-75006 Brynlee Side Chair/2per ctn
** Please make sure you have all parts indicated below prior to assembly.
Assembly Steps:
There are two K/D chairs in one box. Please follow numbers on one chair and letters on the other chair
during assembly.
1. Place back frame (G) on a clean surface.
2. Tighten seat frame(I) to the back legs of frame(G) by using bolt(C), lock washer(B) and at
washer(A) at the center location (see diagram 2). Then, tighten seat frame (I) to back legs of frame
(G) using bolts (E), lock washers (B) and at washers (A) at corner blocks. (See diagram 1)
3. Install front legs (F) onto seat frame (I) using bolts (C), lock washers (B), at washers (A). Tighten
all bolts by hand. (See diagram 2)
4. After all bolts are attached and hand tightened, turn the chair upright.
5. Level the chair following the “chair leveling instruction” as below.
6. Make sure the chair is level and then tighten all bolts completely by using the allen wrench (D).
DIAGRAM 1
DIAGRAM 2

Termékspecifikációk

Márka: Hooker
Kategória: szék
Modell: 638-75006

Szüksége van segítségre?

Ha segítségre van szüksége Hooker 638-75006, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek