Használati útmutató Husqvarna 346XP

Husqvarna Fűrészgép 346XP

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Husqvarna 346XP (44 oldal) a Fűrészgép kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/44
EEEEnnnngggglllliiiisssshhhh
346XP
, 346XPG,
346Xp E-tech,
346XPG E-tech,
353, 353G, 353 E-tech,
353G E-tech, TrioBrake
Operator′s manual
Please r
ead the operator’s manual carefully and make sure you understand the instructions before using the
machine.
KEY
T
O SYMBOLS
2
–
English
Symbols on the mac
hine:
W
ARNING! Chain saws can be
dangerous! Careless or incorrect use
can result in serious or fatal injury to the
operator or others.
Please read the operator’s manual
carefully and make sure you
understand the instructions before
using the machine.
Always wear:
• Approved protective helmet
• Approved hearing protection
• Protective goggles or a visor
This product is in accordance with
applicable EC directives.
Noise emission to the environment
according to the European
Community’s Directive. The machine’s
emission is specified in chapter
Technical data and on label.
WARNING!Kickback may occur when
the nose or tip of the guide bar touches
an object, and cause a lightning fast
reverse reaction, kicking the guide bar
up and towards the operator. May
cause serious personal injury.
Decompression v
alve:
The valve is to
reduce the pressure in the cylinder and
make starting easier. You should always
use the decompression valve when
starting the machine.
Ignition;
choke:
Set the choke control
in the choke position. This should
automatically set the stop switch to the
start position.
Air purge
Adjustment of the oil pump
If your machine bears this symbol
it is equipped with a catalytic
converter.
Chain brake, activated (right)
Chain brake, not activated
(left)
Other symbols/decals on
the machine refer to special
certification requirements
for certain markets.
Symbols in the operator’
s
manual:
Switch off the engine b
y moving the
stop switch to the STOP position
before carrying out any checks or
maintenance.
Always wear approved protective
gloves.
Regular cleaning is required.
Visual check.
Protective goggles or a visor must
be worn.
Refuelling.
Filling with oil and adjusting oil flow.
The chain brake must be engaged
when the chain saw is started.
WARNING! Kickback may occur
when the nose or tip of the guide bar
touches an object, and cause a
lightning fast reverse reaction, kicking
the guide bar up and towards the
operator. May cause serious personal
injury.
CONTENTS
English
–
3
Contents
KEY
TO SYMBOLS
Symbols on the machine:
..................................... 2
Symbols in the operator’s manual: ....................... 2
CONTENTS
Contents
............................................................... 3
INTR
ODUCTION
Dear Customer
, .................................................... 4
WHA
T IS WHAT?
What is what on the chain sa
w? ........................... 5
GENERAL SAFETY PRECA
UTIONS
Bef
ore using a new chain saw .............................. 6
Important .............................................................. 6
Always use common sense .................................. 7
Personal protective equipment ............................. 7
Machine′
s safety equipment ................................. 7
Cutting equipment ................................................ 10
ASSEMBL
Y
Fitting the bar and chain
....................................... 16
FUEL HANDLING
Fuel
...................................................................... 17
Fuelling ................................................................. 18
Fuel safety ............................................................ 18
ST
ARTING AND STOPPING
Star
ting and stopping ........................................... 19
W
ORKING TECHNIQUES
Bef
ore use: ........................................................... 21
General working instructions ................................ 21
How to avoid kickback .......................................... 28
MAINTENANCE
Gener
al ................................................................. 29
Carburettor adjustment ......................................... 29
Checking, maintaining and servicing chain saw
safety equipment .................................................. 30
Muffler .................................................................. 32
Starter .................................................................. 33
Air filter ................................................................. 34
Spark plug ............................................................ 34
Lubricating the bar tip sprocket ............................ 34
Needle bearing lubrication ................................... 34
Adjustment of the oil pump ................................... 35
Cooling system ..................................................... 35
”Air Injection” centrifugal cleaning ........................ 35
Heated handles .................................................... 35
Electrical carburettor heating ................................ 36
Winter use ............................................................ 36
Maintenance schedule ......................................... 37
TECHNICAL D
ATA
T
echnical data ...................................................... 38
Bar and chain combinations ................................. 39
Saw chain filing and file gauges ........................... 39
EC-declaration of conformity ................................ 40

Termékspecifikációk

Márka: Husqvarna
Kategória: Fűrészgép
Modell: 346XP

Szüksége van segítségre?

Ha segítségre van szüksége Husqvarna 346XP, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók Fűrészgép Husqvarna

Husqvarna

Husqvarna 455e Rancher Útmutató

13 Január 2025
Husqvarna

Husqvarna 365H Útmutató

14 Október 2024
Husqvarna

Husqvarna 550 XP G Útmutató

30 Szeptember 2024
Husqvarna

Husqvarna 355 Útmutató

16 Szeptember 2024
Husqvarna

Husqvarna 136 Útmutató

3 Szeptember 2024
Husqvarna

Husqvarna 357XP Útmutató

16 Augusztus 2024
Husqvarna

Husqvarna 120iTK4-PH Útmutató

10 Augusztus 2024
Husqvarna

Husqvarna 327PT5S Útmutató

8 Augusztus 2024
Husqvarna

Husqvarna 525PT5S Útmutató

7 Augusztus 2024
Husqvarna

Husqvarna 455 Rancher II Útmutató

5 Augusztus 2024

Útmutatók Fűrészgép

Legújabb útmutatók Fűrészgép

Bavaria By Einhell

Bavaria By Einhell BHS 66 Útmutató

3 Április 2025
Bavaria By Einhell

Bavaria By Einhell BPS 600 E Útmutató

3 Április 2025
Makita

Makita DCS4610 Útmutató

2 Április 2025
Makita

Makita DPC6430 Útmutató

1 Április 2025
Makita

Makita DCS431 Útmutató

1 Április 2025
Makita

Makita DCS430 Útmutató

1 Április 2025
Makita

Makita EK6101 Útmutató

1 Április 2025
Makita

Makita DCS6401 Útmutató

1 Április 2025
Kraftronic

Kraftronic KT-ST 550 Útmutató

30 Március 2025
Kraftronic

Kraftronic KT-US 650 Útmutató

30 Március 2025