Használati útmutató ICC MSABR68

Olvassa el alább 📖 a magyar nyelvű használati útmutatót ICC MSABR68 (2 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 10 ember találta hasznosnak és 5.5 felhasználó értékelte átlagosan 4.6 csillagra

Oldal 1/2
888-ASK-4ICC csr@icc.com icc.com
© Copyright 2012, ICC. ICC and ICC logo are registered trade name and trademark. All rights reserved. MSR-0509A-Rev A
INSTALLATION INSTRUCTIONS
6” Depth EZ-FOLD
TM
Wall Mount Bracket, 8 RMS
Step 1. Pre-drill screws onto the wall surface, but do not tighten completely.
•Use inner mounting holes positioned at 16.00” to secure bracket to studs.
•Use outer mounting holes positioned at 18.00” to secure bracket to board.
Note: Screws not included. It is recommended to use a level for accurate
mounting.
Step 2. Align mounting holes to the semi-tighten screws and mount the
bracket. Tighten all screws securely before mounting equipment.
Step 3. Route and secure cable bundle(s) to the bracket as shown. 1. Complete installation by installing covers on top and bottom of bracket.
2. Metal rings can be mounted along the sides of the bracket for cable
management. Note: To secure the rings, use #12-24 machine screw nut
with lock washer or #12-24 ange nut. (Not sold by ICC)

Termékspecifikációk

Márka: ICC
Kategória: nincs kategorizálva
Modell: MSABR68

Szüksége van segítségre?

Ha segítségre van szüksége ICC MSABR68, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek