Használati útmutató ICE Watch Learning

Olvassa el alább 📖 a magyar nyelvű használati útmutatót ICE Watch Learning (8 oldal) a SLR fényképezőgép kategóriában. Ezt az útmutatót 15 ember találta hasznosnak és 8 felhasználó értékelte átlagosan 4.3 csillagra

Oldal 1/8
SETTING THE TIME
1. Gently pull the winder out to the 1st position.
2. Turn the winder to set the hour and minute hands to the correct positions.
3. The second hand starts again when the winder is pushed back into its normal position.
Hour hand
Second hand
Minute hand
1st position
Getting started
Press
the winder.
Remove the plastic
stopper (in the direction
of the arrow).
Instructions
The watch must be serviced regularly in order for it to work correctly. The length of time between
services will vary depending on the model, climate and the care you take of your watch. As a
general rule, we recommend the following steps so that you can keep your watch in tip-top
condition for as long as possible.
- Temperature: avoid temperatures below 0°C (30°F) or above 35°C (100°F).
- Avoid prolonged exposure to sun, steam, contact with alcohol, detergents, perfume or
cosmetic products to prevent distorsion, discoloration or any damaging reaction.
- Do not use any watch button while under water to prevent water from entering the
mechanism.
The information contained in this document belongs to ICE Universal Ltd and may not be
reproduced without its authorisation.
ENGLISH

Termékspecifikációk

Márka: ICE Watch
Kategória: SLR fényképezőgép
Modell: Learning

Szüksége van segítségre?

Ha segítségre van szüksége ICE Watch Learning, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek