Használati útmutató ICOM IC-M503
Olvassa el alább 📖 a magyar nyelvű használati útmutatót ICOM IC-M503 (50 oldal) a Vevő kategóriában. Ezt az útmutatót 15 ember találta hasznosnak és 8 felhasználó értékelte átlagosan 4.5 csillagra
Oldal 1/50
INSTRUCTION MANUAL
iM503
VHF MARINE TRANSCEIVER
If your vessel requires assistance, contact other vessels and
the Coast Guard by sending a distress call on Channel 16.
Or, transmit your distress call using digital selective calling on
Channel 70 (the optional DS-100 (#02) must be installed).
USING DIGITAL SELECTIVE CALLING (Ch 70)
(DS-100 (#02) DSC CONTROLLER is required)
DISTRESS CALL PROCEDURE
1. Push and hold [DISTRESS] on the DS-100
for 5 sec. until you hear 5 short beeps
change to one long beep.
2. Wait for an acknowledgment from a coast
station.
•Channel 16 is automatically selected.
3. Push and hold [PTT], then transmit the
appropriate information as at left.
USING CHANNEL 16
DISTRESS CALL PROCEDURE
1. “MAYDAY MAYDAY MAYDAY.”
2. “THIS IS ...............” (name of vessel)
3. Your call sign or other indication of the
vessel (AND 9-digit DSC ID if you have one).
4. “LOCATED AT ...............” (your position)
5. The nature of the distress and assistance
required.
6. Any other information which might facilitate
the rescue.
IN CASE OF EMERGENCY
i
Versions of the IC-M503 which display the “CE” symbol on
the serial number seal, comply with the essential requirements of the
European Radio and Telecommunication Terminal Directive
1999/5/EC.
This warning symbol indicates that this equipment operates in
non-harmonised frequency bands and/or may be subject to licensing
conditions in the country of use. Be sure to check that you have the
correct version of this radio or the correct programming of this radio,
to comply with national licensing requirements.
ii
TABLE OF CONTENTS
IN CASE OF EMERGENCY........................i
TABLE OF CONTENTS ..............................ii
IMPORTANT ..............................................iii
CAUTIONS.................................................iii
1 OPERATING RULES .......................... 1
2 PANEL DESCRIPTION .................. 2 – 5
■ Panel description ............................. 2
■ Function display ............................... 4
■ Microphone ...................................... 5
3 BASIC OPERATION .................... 6 – 10
■ Channel selection ............................ 6
■ Receiving and transmitting .............. 8
■ Call channel programming ............... 9
■ Channel names ................................ 9
■
Optional voice scrambler operation
.. 10
4 DUALWATCH/TRI-WATCH ............... 11
■ Description ..................................... 11
■ Operation ....................................... 11
5 SCAN OPERATIONS ................. 12 – 13
■ Scan types ..................................... 12
■ Setting tag channels ...................... 13
■ Starting a scan ............................... 13
6 SET MODE ................................. 14 – 16
■ Set mode programming ................. 14
■ Set mode items .............................. 15
7 INTERCOM OPERATION ................. 17
■ Intercom operation ......................... 17
8 CONNECTIONS AND
MAINTENANCE ......................... 18 – 24
■ Unpacking ...................................... 18
■ Antenna ......................................... 18
■ Fuse replacement .......................... 18
■ Cleaning ......................................... 18
■ Connections ................................... 19
■ Microphone hanger ........................ 20
■ Mounting the transceiver ............... 21
■ Optional unit installation ................. 23
■ Dimensions ..................................... 24
9 TROUBLESHOOTING ...................... 25
10 CHANNEL LIST ................................ 26
11 SPECIFICATIONS AND OPTIONS ... 27
■ Specifications ................................. 27
■ Options .......................................... 27
12 HM-134 REMOTE-CONTROL
MICROPHONE ........................... 28-38
■ Panel description ........................... 28
■ Function display ............................. 30
■ Channel selection .......................... 32
■ Receiving and transmitting ............ 33
■ Lock functions ................................ 34
■ Display backlighting ....................... 34
■ Monitor function ............................. 34
■ Call channel programming ............. 35
■ Optional voice scrambler
operation......................................... 35
■ Starting a scan ............................... 36
■ Setting tag channels ...................... 36
■ Dualwatch/Tri-watch operation ...... 36
■ Set mode programming ................. 37
■ Intercom operation ......................... 38
■ Channel names .............................. 38
13 HM-134 CONNECTIONS AND
INSTALLATION ........................... 39-41
■ HM-134 supplied accessories .........39
■ Installation .......................................39
MB-75 TEMPLATE
INSTALLATION NOTES
Termékspecifikációk
| Márka: | ICOM |
| Kategória: | Vevő |
| Modell: | IC-M503 |
Szüksége van segítségre?
Ha segítségre van szüksége ICOM IC-M503, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók Vevő ICOM
14 Október 2024
5 Október 2024
5 Október 2024
5 Október 2024
29 Szeptember 2024
28 Szeptember 2024
27 Szeptember 2024
22 Szeptember 2024
22 Szeptember 2024
21 Szeptember 2024
Útmutatók Vevő
- Vevő Boss
- Vevő Blackstar
- Vevő Astro
- Vevő IRiver
- Vevő SRS
- Vevő Teac
- Vevő Xtrend
- Vevő Reloop
- Vevő Pioneer
- Vevő Valcom
- Vevő Thorens
- Vevő AER
- Vevő Velodyne
- Vevő Crest
- Vevő Rocketfish
Legújabb útmutatók Vevő
9 Április 2025
9 Április 2025
5 Április 2025
5 Április 2025
2 Április 2025
2 Április 2025
2 Április 2025
31 Március 2025
31 Március 2025
30 Március 2025