Használati útmutató ICOM IC-R75

ICOM Vevő IC-R75

Olvassa el alább 📖 a magyar nyelvű használati útmutatót ICOM IC-R75 (46 oldal) a Vevő kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF

Oldal 1/46

INSTRUCTION MANUAL

COMMUNICATIONS RECEIVER

iR75

IMPORTANT

READ THIS INSTRUCTION MANUAL

CAREFULLY before attempting to operate the re-

ceiver.

SAVE THIS INSTRUCTION MANUAL. This

manual contains important safety and operating in-

structions for the IC-R75.

EXPLICIT DEFINITIONS

RNEVER apply AC to the [DC13.8V] jack on the re-

ceiver rear panel. This could cause a ﬁre or ruin the re-

ceiver.

RNEVER apply more than 16 V DC, such as a 24 V

battery, to the [DC13.8V] jack on the receiver rear

panel. This could cause a ﬁre or ruin the receiver.

RNEVER let metal, wire or other objects touch any

internal part or connectors on the rear panel of the re-

ceiver. This may result in an electric shock.

NEVER expose the receiver to rain, snow or any liq-

uids.

AVOID using or placing the receiver in areas with tem-

peratures below –10°C (+14°F) or above +60°C

(+140°F). Be aware that temperatures on a vehicle’s

dashboard can exceed 80°C (+176°F), resulting in per-

manent damage to the receiver if left there for ex-

tended periods.

AVOID placing the receiver in excessively dusty envi-

ronments or in direct sunlight.

AVOID placing the receiver against walls or putting

anything on top of the receiver. This will obstruct heat

dissipation.

Place unit in a secure place to avoid inadvertent use by chil-

dren.

During mobile operation, operate the receiverDO NOT

without running the vehicle’s engine. When receiver

power is ON and your vehicle’s engine is OFF, the ve-

hicle’s battery will soon become exhausted.

Make sure the receiver power is OFF before starting

the vehicle. This will avoid possible damage to the re-

ceiver by ignition voltage spikes.

The receiver comes with the following accessories.

Qty.

q AC adapter (AD-55/A/V)* ..................................... 1

wDC power cable (OPC-869)* ............................... 1

eFuse (FGB 3 A; internal use) ............................... 1

rFuse (FGB 3 A; for DC cable)* ............................ 2

* Either AC adapter + 1 fuse (q e, ) or DC power cable + 3

fuses (w, , e r) are supplied depending on versions.

PRECAUTIONS

SUPPLIED ACCESSORIES

Versions of the IC-R75 which display the “CE” symbol on

the serial number seal comply with the European har-

monised standard ETS300 684 (EMC product standard

for Commercially Available Amateur Radio Equipment).

WORD

WARNING

CAUTION

NOTE

DEFINITION

Personal injury, fire hazard or electric

shock may occur.

If disregarded, inconvenience only.

No risk of personal injury, fire or

electric shock.

Equipment damage may occur.

q w

e r

TABLE OF CONTENTS

IMPORTANT .............................................................. i

EXPLICIT DEFINITIONS ........................................... i

PRECAUTIONS ........................................................ i

SUPPLIED ACCESSORIES ...................................... i

1 TABLE OF CONTENTS ....................................... 1

2 PANEL DESCRIPTION ................................... 2 – 6

■Front panel ........................................................ 2

■ Function display ................................................ 5

■ Rear panel ......................................................... 6

3 INSTALLATION AND CONNECTIONS ......... 7 – 10

■Grounding .......................................................... 7

■ Receiver stand .................................................. 7

■ Optional bracket and carrying handle ................ 7

■Connections ...................................................... 8

■ Antenna connection ........................................... 9

■Tape recorder connections ................................ 9

■Transceive function ........................................... 9

■FSK and AFSK (SSTV) connections ............... 10

■Connecting to a PC ......................................... 10

4 FREQUENCY SETTING .............................. 11 – 13

■Read me ﬁrst ................................................... 11

■Using the keypad ............................................. 11

■ Frequency setting ............................................ 12

■Dial lock function ............................................. 13

5 RECEIVE FUNCTIONS ............................... 14 – 20

■Mode selection ................................................ 14

■ Squelch and RF gain ....................................... 14

■Twin PBT operation ......................................... 15

■ Noise blanker .................................................. 15

■Preamp ............................................................ 16

■Attenuator ........................................................ 16

■AGC time constant .......................................... 16

■ Antenna selection ............................................ 16

■ CW reverse mode ........................................... 17

■CW pitch control .............................................. 17

■RTTY reverse mode ........................................ 17

■Filter selection ................................................. 18

■ Filter set mode ................................................. 19

■Optional noise reduction function .................... 20

■ Optional auto notch function ............................ 20

6 MEMORY OPERATION ............................... 21 – 24

■Memory channels ............................................ 21

■ Memory channel selection ............................... 21

■ Memory channel programming ........................ 22

■Frequency transferring .................................... 23

■ Memory names ................................................ 24

■ Memory clearing .............................................. 24

7 SCANS ........................................................ 25 – 27

■ Scan types ....................................................... 25

■Preparation ...................................................... 25

■Programmed scan operation ........................... 26

■ Memory/select memory scan operation .......... 26

■ Setting select memory channels ..................... 26

■ Priority watch operation ................................... 27

■ Auto memory write scan operation .................. 27

8 CLOCK AND TIMERS ................................. 28 – 29

■Setting the current time ................................... 28

■ Setting power-on time ..................................... 28

■ Setting power-off time ...................................... 29

■ Setting sleep timer period ................................ 29

9 SET MODE .................................................. 30 – 33

■ Set mode description ....................................... 30

10 OPTION INSTALLATIONS ....................... 34 – 35

■ Opening the receiver’s case ............................ 34

■CR-282 HIGH STABILITY CRYSTAL UNIT .......... 34

■UT-102 .................. 34VOICE SYNTHESIZER UNIT

■UT-106 ............................................. 35DSP UNIT

■Optional IF ﬁlters ............................................. 35

11 MAINTENANCE ........................................ 36 – 37

■Troubleshooting ............................................... 36

■ Resetting the CPU ........................................... 36

■ Fuse replacement ............................................ 37

■Clock backup battery replacement .................. 37

12 SPECIFICATIONS ........................................... 38

13 OPTIONS ......................................................... 39

14 CONTROL COMMAND ............................ 40 – 43

■Remote jack (CI-V) information ....................... 40

Termékspecifikációk

Márka:	ICOM
Kategória:	Vevő
Modell:	IC-R75

Szüksége van segítségre?

Ha segítségre van szüksége ICOM IC-R75, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek

Az Ön neve*

Az Ön e-mail címe*

Írja ide kérdését

Útmutatók Vevő ICOM

ICOM IC-M15 Útmutató

14 Október 2024

ICOM IC-4008E Útmutató

5 Október 2024

ICOM AT-140 Útmutató

5 Október 2024

ICOM IC-25H Útmutató

5 Október 2024

ICOM IC-M120 Útmutató

29 Szeptember 2024

ICOM IC-502A Útmutató

28 Szeptember 2024

ICOM IC-T7H Útmutató

27 Szeptember 2024

ICOM IC-M600E Útmutató

22 Szeptember 2024

ICOM IC-471H Útmutató

22 Szeptember 2024

ICOM IC-H12 Útmutató

21 Szeptember 2024

Útmutatók Vevő

Legújabb útmutatók Vevő

Yamaha Aventage RX-A4A Útmutató

9 Április 2025

Yamaha Aventage RX-A8A Útmutató

9 Április 2025

DJI D-RTK 3 Útmutató

5 Április 2025

Phonocar PH544 Útmutató

5 Április 2025

QSC SPA-Qf 60x2 Útmutató

2 Április 2025

Harper HDT2-5010 Útmutató

2 Április 2025

Harper HDT2-2010 Útmutató

2 Április 2025

Alpine MRX-F65 Útmutató

31 Március 2025

Streacom TL1 Útmutató

31 Március 2025

Pro-Ject Stereo Box DS Útmutató

30 Március 2025