Használati útmutató IFi Audio Hip-dac2

Olvassa el alább 📖 a magyar nyelvű használati útmutatót IFi Audio Hip-dac2 (1 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 14 ember találta hasznosnak és 4 felhasználó értékelte átlagosan 4.6 csillagra

7. USB3.0 'Type A' data input port

Connect your phone to hip dac2 with Lightning to USB Camera

Adapter (Apple) or USB On-The-Go (OTG) cable (Android). When

using other audio sources connect with a USB cable.

Tip: It is preferable to use a USB 3.0 port over using a USB 2.0 port on the PC.

8. USB-C (5V) battery charge input

For charging only. It will take ~3 hours for a high-powered USB

charger to fully charge hip dac2. Use the enclosed USB 'Type A' to

'Type C' cable, smart charger or a regular charger up to 6.3V.

9. LED for Battery Status

LED Status

White* > 75%

Green* 25% >

Red* 10% >

Red (flashing)10% ≤

*Battery LED will flash when it is charging

Note: For use with PC it is necessary to download drivers.

Tip: For all latest firmware updates please refer to our website here:

www.ifiaudio.com/downloads/

ifi-audio.com Ver1.0

3125 64

4. ON/OFF and Analogue Volume Control

The analogue volume control in hip dac2 is superior to any digital

volume control.

Warning: Due to the high power of hip dac2, always start off at a low volume level so

that there is no risk of damage to your headphones and your hearing. iFi audio is not

responsible for any hearing or equipment damage from misuse.

Power ON. Power OFF.

Tip: hip dac2 will continue to use battery power even if the USB cable is connected

afterwards.

Tip: For connection to Apple devices, Apple Lightning to USB Camera Adapter is

required. For connection to Android devices, USB On-The-Go (OTG) cable and

appropriate OS support are required.

For more information, please refer to www.ifi-audio.com

5. Balanced 4.4mm headphone output

Connect balanced 4.4mm headphones.

6. S-Balanced 3.5mm headphone output

Connect 3.5mm headphones.

87 9

OFF

Specications

Digital Input: USB 3.0 type 'A' (USB2.0 compatible)

Formats supported:

DSD DSD256/128/64, Quad/Double/Single-Speed DSD

PCM 384/352.8/192/176.4/96/88.2/48/44.1kHz

DXD 384/352.8kHz

MQA 384/352.8kHz

DAC: Bit-Perfect DSD & DXD DAC by Burr Brown

Headphone Outputs:

Balanced 4.4mm

S-Balanced(S-E) 3.5mm

Power Output:

Balanced 400mW @ 32Ω; 6.3V @ 600Ω

S-Balanced(S-E) 280mW @ 32Ω; 3.2V @ 600Ω

Battery: Lithium-polymer 2200mAh approx. 8 hours

Power System: Charging via USB-C,

BC V1.2 compliant up to 1000mA charging current

Power (max): <2W idle, 4W max

Dimensions: 102 x 70 x 14 mm

4.0" x 2.8" x 0.6"

Weight: 125 g (0.28 lbs)

Warranty period: 12 months

Specications are subject to change without noti ce.

H

H

H

HH

a

a

a

aa

p

p

p

p pc

c

c

cc2

2

2

22

d

d

d

dd

1. PowerMatch (on/off)

PowerMatch enables hip dac2 to match headphones’ impedance and

sensitivity in order to generate their highest operational efficiency.

Tip: For in-ear-monitors (earbuds) try PowerMatch off. For headphones try PowerMatch on.

2. XBass (on/off)

Many headphones lack the correct bass response. XBass is an

analogue circuit designed to 'add back' the lost bass response for a

more accurate reproduction of the original music.

3. Audio Format LED (kHz)

The LED colour scheme indicates the audio format and sampling

frequency received by hip dac2 from the music source.

LED Mode

Yellow PCM 44.1/48kHz

White PCM 88.2/96/176.4/192/352.8/384kHz

Cyan DSD 64/128

Red DSD 256

Green MQA

Blue MQA Studio

Magenta Original Sample Rate*

*MQB

Warning: Installing GTO enabled firmware may result in the LED's on this device no longer

changing in accordance with the above table

Termékspecifikációk