Használati útmutató IFM E30131

Olvassa el alább 📖 a magyar nyelvű használati útmutatót IFM E30131 (2 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 11 ember találta hasznosnak és 6 felhasználó értékelte átlagosan 4.8 csillagra

Oldal 1/2
Installation Instructions
Adapter
E30131
706005/00 05/2011
UK
ifm electronic gmbh • Friedrichstr. 1 • 45128 Essen • Germany
http://www.ifm.com • e-mail: info@ifm.com
2
Mounting sensor - adapter
D
A
B
C
1 2 3
Slightly grease the threads and sealing areas of the sensor and adapter with
the lubricating paste (A).
The paste must be suitable and approved for the application and compatible
with the elastomers used.
Place the sealing ring (B) in the groove (C) of the sensor.
The adapter is supplied with an EPDM O-ring. More sealing rings are available
as accessories: FKM O-ring, order no. E30123.
Screw the sensor into the adapter until it is hand-tight.
Clamp the sensor + adapter into a clamping device (D). Tighten the clamping
device only slightly so that the adapter does not warp.
Tighten the sensor using a spanner until you can feel the end stop (this cor-
responds to a maximum tightening torque of 35 Nm). Note: Further tightening
may affect the sealing effect.
Technical data and further information at www.ifm.com

Termékspecifikációk

Márka: IFM
Kategória: nincs kategorizálva
Modell: E30131

Szüksége van segítségre?

Ha segítségre van szüksége IFM E30131, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek