Használati útmutató IFM E33212
IFM
nincs kategorizálva
E33212
Olvassa el alább 📖 a magyar nyelvű használati útmutatót IFM E33212 (3 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 6 ember találta hasznosnak és 3.5 felhasználó értékelte átlagosan 4.8 csillagra
Oldal 1/3

Installation instructions
Aseptoflex Vario adapter
with O-ring / PEEK sealing ring
E332xx
E333xx
704965/01 02/2011
UK

2
1 Installation sensor - adapter
C
B
A
►Grease the sensor thread with
paste (A).
The paste must be suitable and ap-
proved for the application and com-
patible with the elastomers used.
►Place the sealing ring (B) in the
groove (C) of the sensor.
►Screw the sensor into the adapter
until it is hand-tight. When doing
so, avoid mechanical effects on the
sealing areas, the hygienic area and
the pressure measuring cell.
D
►Clamp the sensor + adapter into a
clamping device (D). Tighten the
clamping device only slightly so that
the adapter does not warp.
►Tighten the sensor using a spanner
until you can feel the end stop (this
corresponds to a maximum tighten-
ing torque of 35 Nm). Note: Further
tightening may affect the sealing
effect.

3
UK
The adapter is supplied with an EPDM O-ring. More sealing rings are available as
accessories:
• FKM O-ring, order no. E30123.
• PEEK sealing ring, order no. E30124.
Use a new adapter when changing from a PEEK seal to O-ring sealing.
2 Mounting to the process connection
►Fix the sensor + adapter are fixed to the process connection using a fixing ele-
ment (coupling nut, clamp flange, etc.).
If it is not possible to slide the fixing element down over the top of the unit: slide
it up over the bottom of the unit before the adapter is mounted.
Use in hygienic areas to EHEDG:
►Make sure that the sensors are integrated into the system in accord-
ance with EHEDG.
Termékspecifikációk
Márka: | IFM |
Kategória: | nincs kategorizálva |
Modell: | E33212 |
Szüksége van segítségre?
Ha segítségre van szüksége IFM E33212, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók nincs kategorizálva IFM
9 Április 2025
9 Április 2025
9 Április 2025
23 Március 2025
23 Március 2025
18 Március 2025
18 Március 2025
18 Március 2025
18 Március 2025
16 Január 2025
Útmutatók nincs kategorizálva
- nincs kategorizálva Ferguson
- nincs kategorizálva Gravity
- nincs kategorizálva Festool
- nincs kategorizálva REV
- nincs kategorizálva Profoto
- nincs kategorizálva Concept
- nincs kategorizálva Videotel Digital
- nincs kategorizálva Ketron
- nincs kategorizálva Hovicon
- nincs kategorizálva Meross
- nincs kategorizálva Hikvision
- nincs kategorizálva Iogear
- nincs kategorizálva NEXTO DI
- nincs kategorizálva Fellowes
- nincs kategorizálva Grunkel
Legújabb útmutatók nincs kategorizálva
10 Április 2025
10 Április 2025
10 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025