Használati útmutató IFM E40174

Olvassa el alább 📖 a magyar nyelvű használati útmutatót IFM E40174 (3 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 8 ember találta hasznosnak és 4.5 felhasználó értékelte átlagosan 4.0 csillagra

Oldal 1/3
Installation instructions
Clamp adapter
E40160
E40174
704407 / 01 09 / 2010
UK
2
Functions and features
Installation of probe sensors with a diameter of 10 mm in R½ (E40160) or ½“ NPT
(E40174) process connections.
Installation
Screw the adapter into the process con-
nection and tighten it.
Insert the sensor into the adapter.
Set the installation length.
Tighten the coupling nut manually.
Mark its position with lines (A).
A
3
UK
Tighten the coupling nut with a tool by
1¼ turn (tightening torque 45 Nm).
Removal:
Loosen the nut, pull out the sensor.
Repeated installation
Insert the sensor again.
Tighten the nut with a tool without applying too much force until the initial posi-
tion is reached. For reliable sealing, tighten a bit more.
Scale drawing
E40160 E40174 Components
22
R
12
46,3
19
10
22
46,3
19
10
"NPT
2
1
1
2
4
3
1: coupling nut
2: clamping ring back
3: clamping ring front
4: fitting

Termékspecifikációk

Márka: IFM
Kategória: nincs kategorizálva
Modell: E40174

Szüksége van segítségre?

Ha segítségre van szüksége IFM E40174, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek