Használati útmutató IFM E70585

Olvassa el alább 📖 a magyar nyelvű használati útmutatót IFM E70585 (4 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/4
Installation instructions
FC insulation displacement connector
E70585
E70586
E70587
80271731/00 12/2017
UK
2
1 Preliminary note
Technical data, approvals, accessories and further information at
www.ifm.com.
2 Safety instructions
Read this document before setting up the product and keep it during the entire
service life.
The product must be suitable for the corresponding applications and
environmental conditions without any restrictions.
Only use the product for its intended purpose ( Functions and features).
If the operating instructions or the technical data are not adhered to, personal
injury and/or damage to property may occur.
The manufacturer assumes no liability or warranty for any consequences
caused by tampering with the product or incorrect use by the operator.
Installation, electrical connection, set-up, operation and maintenance of the
product must be carried out by qualified personnel authorised by the machine
operator.
The plant manufacturer is responsible for the safety of the plant in which the
device is installed.
If the device is used in a way that is not intended by the manufacturer, the
protection supported by the device may be impaired.
Protect units and cables against damage.
3 Functions and features
E70585 / E70586
The FC insulation displacement connector carries the AS-i voltage from the flat
cable to the M12 socket.
Current rating 4 A.
The connectors E70585 and 70586 differ in the orientation of the M12 socket
(keyway).
3
UK
E70587
The FC insulation displacement connector carries the AS-i voltage and the
external 24 V supply from the flat cable to the M12 socket.
Current rating 4 A.
4 Wiring
1
3
E70586
1: AS-i +
3: AS-i -
1
3
E70585
1: AS-i +
3: AS-i -
5
1
3 4
2
E70587
1: AS-i +
2: AUX -
3: AS-i -
4: AUX +
5 Installation
Disconnect power.
Loosen screw 1 (included) and open the
device.
1: screw (tightening torque 1.65 Nm)
Choose a flat mounting surface and fix the
device on it (mounting holes 2). The mounting
screws are not supplied.
2: mounting holes

Termékspecifikációk

Márka: IFM
Kategória: nincs kategorizálva
Modell: E70585

Szüksége van segítségre?

Ha segítségre van szüksége IFM E70585, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók nincs kategorizálva IFM

IFM

IFM E40581 Útmutató

9 Április 2025
IFM

IFM O3R252 Útmutató

9 Április 2025
IFM

IFM PG1704 Útmutató

9 Április 2025
IFM

IFM PE2599 Útmutató

23 Március 2025
IFM

IFM MK5312 Útmutató

23 Március 2025
IFM

IFM RU6035 Útmutató

18 Március 2025
IFM

IFM SF3210 Útmutató

18 Március 2025
IFM

IFM RU6045 Útmutató

18 Március 2025
IFM

IFM KI0200 Útmutató

18 Március 2025
IFM

IFM PT2400 Útmutató

16 Január 2025

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva