Használati útmutató IFM E70599
IFM
nincs kategorizálva
E70599
Olvassa el alább 📖 a magyar nyelvű használati útmutatót IFM E70599 (5 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 4 ember találta hasznosnak és 2.5 felhasználó értékelte átlagosan 4.8 csillagra
Oldal 1/5

Installation instructions
FC insulation displacement connector
E70598
E70599
80271733/00 12/2017
UK

2
1 Preliminary note
Technical data, approvals, accessories and further information at
www.ifm.com.
2 Safety instructions
• Read this document before setting up the product and keep it during the entire
service life.
• The product must be suitable for the corresponding applications and
environmental conditions without any restrictions.
• Only use the product for its intended purpose ( Functions and features).→
• If the operating instructions or the technical data are not adhered to, personal
injury and/or damage to property may occur.
• The manufacturer assumes no liability or warranty for any consequences
caused by tampering with the product or incorrect use by the operator.
• Installation, electrical connection, set-up, operation and maintenance of the
product must be carried out by qualified personnel authorised by the machine
operator.
• The plant manufacturer is responsible for the safety of the plant in which the
device is installed.
• If the device is used in a way that is not intended by the manufacturer, the
protection supported by the device may be impaired.
• Protect units and cables against damage.
3 Functions and features
The FC insulation displacement connector carries the AS-i voltage from the flat
cable to the round cable (open end).
• Current rating 4 A.

3
UK
4 Installation
►Disconnect power.
►Loosen screw 1 (included) and open the
device.
1: screw (tightening torque 1.65 Nm)
2: core colours (brown AS-i + / blue AS-i -)
2
1
►Choose a flat mounting surface and fix the
splitter on it (mounting holes 3).
The mounting screws are not supplied.
3
►Insert the yellow AS-i flat cable for the AS-i
voltage in the upper flat cable duct.
►Place the cable correctly in the profile slot.
Termékspecifikációk
Márka: | IFM |
Kategória: | nincs kategorizálva |
Modell: | E70599 |
Szüksége van segítségre?
Ha segítségre van szüksége IFM E70599, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók nincs kategorizálva IFM
9 Április 2025
9 Április 2025
9 Április 2025
23 Március 2025
23 Március 2025
18 Március 2025
18 Március 2025
18 Március 2025
18 Március 2025
16 Január 2025
Útmutatók nincs kategorizálva
- nincs kategorizálva Natec
- nincs kategorizálva DMax
- nincs kategorizálva Columbus
- nincs kategorizálva MIOPS
- nincs kategorizálva NZR
- nincs kategorizálva Britax-Römer
- nincs kategorizálva Navman
- nincs kategorizálva Hellberg
- nincs kategorizálva Emeril Everyday
- nincs kategorizálva Acer
- nincs kategorizálva Galanz
- nincs kategorizálva Videotec
- nincs kategorizálva HIOAZO
- nincs kategorizálva BirdDog
- nincs kategorizálva Séura
Legújabb útmutatók nincs kategorizálva
10 Április 2025
10 Április 2025
10 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025