Használati útmutató IFM O6P207

Olvassa el alább 📖 a magyar nyelvű használati útmutatót IFM O6P207 (6 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 6 ember találta hasznosnak és 3.5 felhasználó értékelte átlagosan 4.4 csillagra

Oldal 1/6
Operating instructions
Retro-reflective sensor
O6P2
O6P200 / 01 01 / 2015
UK
2
1 Preliminary note
1.1 Symbols used
Instruction
> Reaction, result
[…] Designation of pushbuttons, buttons or indications
Cross-reference
Important note
Non-compliance can result in malfunctions or interference.
2 Functions and features
In conjunction with a prismatic reflector or reflective tape the retro-reflective sen-
sor detects objects and materials without contact and indicates their presence by
a switching signal.
3 Installation
Fit the prismatic reflector or the reflective tape behind the object to be detected.
Align the retro-reflective sensor to it and secure it to a bracket.
Maximum range only with accurate alignment.
3
UK
4 Operating and display elements
1: LED yellow - switching output active
2: Setting potentiometer „sensitivity“
3: LED green - operation, stability indication
4: Selector „output function“
4.1 Stability indication
The green LED is lit when the supply voltage is applied and there is sufficient
excess gain. Under these conditions the sensor receives a stable signal.
stable signal switch point stable signal
Light-on mode
LED green on onoff off
LED yellow on on off off
Dark-on mode
LED green on onoff off
LED yellow on onoff off

Termékspecifikációk

Márka: IFM
Kategória: nincs kategorizálva
Modell: O6P207

Szüksége van segítségre?

Ha segítségre van szüksége IFM O6P207, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek