Használati útmutató IFM O6P306

Olvassa el alább 📖 a magyar nyelvű használati útmutatót IFM O6P306 (13 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 5.0 csillagra

Oldal 1/13
Operating instructions
Retro-reflective sensor
O6P3
O6P300 / 02 11 / 2015
UK
2
1 Preliminary note
1.1 Symbols used
Instruction
> Reaction, result
[…] Designation of pushbuttons, buttons or indications
Cross-reference
Important note
Non-compliance can result in malfunctions or interference.
2 Functions and features
In conjunction with a prismatic reflector or reflective tape the retro-reflective sen-
sor detects objects and materials without contact and indicates their presence by
a switching signal.
3 Installation
Fit the prismatic reflector or the reflective tape behind the object to be detected.
Align the retro-reflective sensor to it and secure it to a bracket.
Maximum range only with accurate alignment.
3
UK
4 Operating and display elements
1: LED yellow - switching output active
2: Setting potentiometer „sensitivity“
3: LED green - operation
4: Selector „output function“
4.1 Stability indication
The green LED is lit when the supply voltage is applied and the sensor signal is
stable.
stable signal switch point stable signal
Light-on mode
LED green on onoff off
LED yellow on on off off
Dark-on mode
LED green on onoff off
LED yellow on onoff off
5 Electrical connection
The unit must be connected by a qualified electrician.
The national and international regulations for the installation of electri-
cal equipment must be adhered to.
Ensure voltage supply to EN 50178.
Disconnect power.
Connect the unit as follows:

Termékspecifikációk

Márka: IFM
Kategória: nincs kategorizálva
Modell: O6P306

Szüksége van segítségre?

Ha segítségre van szüksége IFM O6P306, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek