Használati útmutató IFM O6S300

Olvassa el alább 📖 a magyar nyelvű használati útmutatót IFM O6S300 (6 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 4 ember találta hasznosnak és 2.5 felhasználó értékelte átlagosan 4.8 csillagra

Oldal 1/6
Operating instructions
Through-beam sensor
O6E3 / O6S3
O6E300 / 02 11 / 2015
UK
2
1 Preliminary note
1.1 Symbols used
Instruction
> Reaction, result
[…] Designation of pushbuttons, buttons or indications
Cross-reference
Important note
Non-compliance can result in malfunctions or interference.
2 Functions and features
The through-beam sensor detects objects and materials without contact and
indicates their presence by a switching signal.
3 Installation
Transmitter Receiver
Install the receiver (O6E...) and secure it to a bracket.
Align the transmitter (O6S...) to the receiver and fix it.
Maximum range only with accurate alignment.
3
UK
4 Operating and display elements
1: LED green - operation
Transmitter
1: LED yellow - switching output active
2: Setting potentiometer „sensitivity“
3: LED green - operation
4: Selector „output function“
Receiver
4.1 Stability indication
The green LED is lit when the supply voltage is applied and the sensor signal is
stable.
stable signal switch point stable signal
Light-on mode
LED green on onoff off
LED yellow on on off off
Dark-on mode
LED green on onoff off
LED yellow on onoff off

Termékspecifikációk

Márka: IFM
Kategória: nincs kategorizálva
Modell: O6S300

Szüksége van segítségre?

Ha segítségre van szüksége IFM O6S300, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek