Használati útmutató IFM OG5097

IFM érzékelő OG5097

Olvassa el alább 📖 a magyar nyelvű használati útmutatót IFM OG5097 (8 oldal) a érzékelő kategóriában. Ezt az útmutatót 7 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/8
Operating instructions
Diffuse reflection sensor
OG
701165 / 05 09 / 2005
UK
2
Contents
Function and features ����������������������������������������������������������������������������������������������3
Electrical connection������������������������������������������������������������������������������������������������3
Installation ���������������������������������������������������������������������������������������������������������������4
Setting of the sensitivity with stationary objects ������������������������������������������������������5
Setting of the sensitivity with moving objects ����������������������������������������������������������6
Setting of the maximum sensitivity ��������������������������������������������������������������������������7
Locking / Unlocking �������������������������������������������������������������������������������������������������7
Operation ����������������������������������������������������������������������������������������������������������������7
Function check output ������������������������������������������������������������������������������������������7
Maintenance ������������������������������������������������������������������������������������������������������������8
3
UK
Function and features
The diffuse reflection sensor detects objects and materials without contact and
indicates their presence by a switched signal
Range (r): see type label (value referred to white paper 200 mm x 200 mm)�
Electrical connection
The device shall be supplied from an isolating source and protected by
an overcurrent device such that the limited voltage circuit requirements in
accordance with UL 508 are met�
Isolate power, then connect the unit�
Connect the unit as follows:
DC PNP
BN
BK
BU
L+
L
BU
BK
BN
L+
L
L
L+
1
2
4
3
L
L+
3
2
4
1
Pin 2 = fc-output

Termékspecifikációk

Márka: IFM
Kategória: érzékelő
Modell: OG5097

Szüksége van segítségre?

Ha segítségre van szüksége IFM OG5097, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek