Használati útmutató IFM TK6330

Olvassa el alább 📖 a magyar nyelvű használati útmutatót IFM TK6330 (5 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 4 ember találta hasznosnak és 2.5 felhasználó értékelte átlagosan 4.4 csillagra

Oldal 1/5
Operating instructions
Electronic temperature sensor
TK6330
704473 / 00 09 / 2008
UK
2
1 Functions and features
The unit detects the system temperature in machines and installations.
2 Function
The unit switches the two complementary outputs OUT1 / OUT2:
- With rising temperature OUT1 closes and OUT2 opens when the set value
[SET] is reached.
- With falling temperature OUT1 opens and OUT2 closes, when the set value
[RESET] is reached.
Measuring range: -25...140°C / -13...284°F.
Measuring element: Pt1000 according to DIN EN 60751, class B.
3 Installation
Before mounting and removing the unit: ensure that no medium can leak
at the process connection.
Insert the unit in a ¼“ NPT process connection.
Tighten firmly. Tightening torque: max. 25 Nm.
4 Electrical connection
The unit must be connected by a qualified electrician.
The national and international regulations for the installation of electrical
equipment must be adhered to.
Disconnect power.
Connect the unit as indicated on the type label.
3
UK
5 Setting
SET
RESET
1
3
2
4
pnp
pnp
9,6...
32 V
DC
500mA
500mA
1
2
35
6
4
1: locking ring
2: setting rings (manually adjustable after unlocking)
3: LED green: supply voltage O.K.
4: setting marks
5: LED yellow: value [SET] reached, OUT1 = ON / OUT2 = OFF]
6: process connection ¼“ NPT
pin 4 = OUT1 / pin 2 = OUT2
Minimum distance between [SET] and [RESET] = 3 K.
To obtain the setting accuracy: Set both rings to the minimum value, then set
the requested values.

Termékspecifikációk

Márka: IFM
Kategória: nincs kategorizálva
Modell: TK6330

Szüksége van segítségre?

Ha segítségre van szüksége IFM TK6330, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek