Használati útmutató IFM TM0061

Olvassa el alább 📖 a magyar nyelvű használati útmutatót IFM TM0061 (3 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 8 ember találta hasznosnak és 4.5 felhasználó értékelte átlagosan 4.9 csillagra

Oldal 1/3
Installation Instructions
Temperature sensor
TMxx61
706039/00 06/2011
UK
2
Make sure that there is no medium flowing through the system before
mounting and removing the sensor. Take into account possible dangers
which may arise from extreme plant/medium temperatures
The unit is adaptable for various
process fittings. Aseptoflex adapters
to be ordered separately as acces-
sories.
Mount adapter (B) to the sensor first,
then sensor + adapter to the proc-
ess connection by means of a nut, a
clamping flange or similar (A).
A
B
Welding adapter
If you use a welding adapter: Weld the adapter first. Then mount the sensor.
Mounting of the Aseptoflex adapter
Step 1
Slightly grease the threads and seal-
ing areas of the sensor and adapter
with lubricating paste.
The paste must be suitable and ap-
proved for the application and com-
patible with the elastomers used.
Recommendation: Klüber paste UH1
84-201 with USDA-H1 approval for
the food industry.
Make sure that the O-ring (C) is cor-
rectly positioned.
C
Step 2
Screw the sensor into the adapter.
Avoid mechanical influence on the
sealing chamfers.
I
3
UK
Step 3
Clamp sensor and adapter into a
clamping device (D). The sealing
chamfers (E) must not be damaged.
Tighten the sensor with a spanner
until you can feel the end stop.
If you continue to turn, this can have
adverse effect on the sealing.
30
D
E
NOTE: A guarantee for a long-term stable and maintenance-free fitting, with no
bug traps in the hygienic sealing of the metal seal (Aseptoflex connection) is only
valid for once-only mounting.

Termékspecifikációk

Márka: IFM
Kategória: nincs kategorizálva
Modell: TM0061

Szüksége van segítségre?

Ha segítségre van szüksége IFM TM0061, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek