Használati útmutató IOptron ICam 178M
Olvassa el alább 📖 a magyar nyelvű használati útmutatót IOptron ICam 178M (7 oldal) a kamera kategóriában. Ezt az útmutatót 13 ember találta hasznosnak és 7 felhasználó értékelte átlagosan 3.8 csillagra
Oldal 1/7
iOptron Corporation 6E Gill Street, Woburn, MA 01801 |
iOptron Planetary Camera Manual
iCAM178M
Product # 3371
Ver. 1.00 2021.12
iOptron reserves the rights to revise this instruction without notice. Actual color/contents/design/function of a product may dier
from those described in this instruction manual.
2
Product Descripon
iCAM178M camera uses a Sony IMX178 mono sensor. The imaging area is 1/1.8”, with 2.4um pixel size,
6.4MP resoluon (2096*2078) and diagonal of 9mm.
iCAM178M camera has a very high sensivity. It is an idea camera for planetary imaging. The camera
has a very low readout noise. The tesng results indicated that the readout noise is as low as 1.34e at a
gain of 350. The camera has a unique DPS (Dead Pixel Suppression) technology to eliminate the any
abnormal/dead pixel by analyzing camera dark frames. The camera has a unique HCG mode, which will
automacally turn on when the camera gain seng is >30. The HCG mode can greatly reduce the
readout noise and retain the same high dynamic range as it at low gain.
When the camera is connected to the USB3.0 interface and full-resoluon preview is used, it can reach
60 FPS in RAW8 mode (10bit ADC). During image recording, the actual recording speed is aected by the
hard drive wring speed. It is recommended to use a high-quality solid state drive to record data to
realize the full benet of the USB3.0 data speed. The ST-4 guiding port allows one to connect the camera
to a mount GUIDE port for ST-4 autoguiding.
Package Contents
iCAM178M Camera
USB 3.0 cable
ST-4 guiding cable
Online Contents
This Manual
Camera driver
ASCOM driver
System Requirement
Windows 7/8/10 is supported
Linux and Mac OS will be supported soon.
Driver Installaon
1. Download iCAM/PlayerOne camera driver. Save in a folder or desktop.
2. DO NOT connect the camera to the computer yet. Double click on downloaded driver to
enter installaon page.
3
3. Check and click License Agreement Install.
4. Check and click . Always Trust Soware from PlayerOne Install
5. Click when it is down. Install Finished
6. Now connect the camera to a computer using included USB 3.0 cable. Check iCAM status in
Device Manager Imaging devices under .
Termékspecifikációk
| Márka: | IOptron |
| Kategória: | kamera |
| Modell: | ICam 178M |
Szüksége van segítségre?
Ha segítségre van szüksége IOptron ICam 178M, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók kamera IOptron
26 December 2024
26 December 2024
29 Augusztus 2024
29 Augusztus 2024
Útmutatók kamera
- kamera Meade
- kamera Syrp
- kamera Bauhn
- kamera Praktica
- kamera Bushnell
- kamera Sony
- kamera BenQ
- kamera Contax
- kamera InfiRay
- kamera Eufy
- kamera Viewsonic
- kamera MuxLab
- kamera EZVIZ
- kamera Midland
- kamera Kyocera Yashica
Legújabb útmutatók kamera
10 Április 2025
9 Április 2025
3 Április 2025
1 Április 2025
29 Március 2025
29 Március 2025
28 Március 2025
27 Március 2025
27 Március 2025
20 Március 2025