Használati útmutató Irritrol RFS1000
Irritrol
nincs kategorizálva
RFS1000
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Irritrol RFS1000 (12 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 13 ember találta hasznosnak és 7 felhasználó értékelte átlagosan 4.5 csillagra
Oldal 1/12

Wireless RainSensor User’s Guide 1
Table of Contents
Component Overview 2
Quick Start Installation Instructions 3
Detailed Installation Instructions
• Mounting the Receiver
• Wiring the Receiver
• Control Wire Connection
• Power Wire Connection
• Initial Receiver Testing
4
4
4
4
6
6
Installing the Sensor / Transmitter
• Testing the Signal Strength
• Installation
• Freeze Sensor Installation
7
7
7
7
Wireless RainSensor Operation
• Normal Operation
• Smart Bypass
• Power Down
• Receiver Learn Mode
• Attention Required
8
8
8
8
8
8
Sensor Adjustment
Battery Replacement
9
9
Changing Sensor/Transmitter Code 9
Troubleshooting 10
Specications 11
Electromagnetic Compatibility 12
Technical Support Numbers 12
Congratulations on your purchase of the Irritrol Systems Wireless RainSensor. The
Wireless RainSensor components are designed for easy installation, so your sensor
controlled irrigation system will be up and running in minutes.
Before attempting the installation, please read through these instructions in their
entirety, and refer the installation instructions for your irrigation system controller/timer
in regards to connecting a rain sensor or rain switch. The Wireless RainSensor is
designed to work with either Normally Open or Normally Closed sensor circuits.
: Please note the following information regarding installation and use of Important
the Wireless RainSensor components:
• The RainSensor Receiver Module is designed to operate with 24 VAC power
only. Connecting the receiver wiring to 120/240 VAC power may result in severe
equipment damage.
• Installation methods must comply with all applicable national and local building
codes. If you are unsure about proper wiring practices, have a qualied contractor
perform the installation for you.
• The Receiver cover should always be used when the Receiver is installed outdoors.
• The Sensor/Transmitter should never be submerged in water or installed inside a
rain gutter.
Introduction
Wireless RainSensorTM
Models RS1000 & RFS1000 (+Freeze)
User’s Guide
RS1000
SENSOR STATUS
SIGNAL
POWER
Blinking Bypass ON
Blinking Attn. Reqd.
SENSOR STATUS
PRESS
Receiver
Sensor/Transmitter
Termékspecifikációk
| Márka: | Irritrol |
| Kategória: | nincs kategorizálva |
| Modell: | RFS1000 |
Szüksége van segítségre?
Ha segítségre van szüksége Irritrol RFS1000, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók nincs kategorizálva Irritrol
10 Október 2024
7 Október 2024
20 Szeptember 2024
11 Szeptember 2024
6 Szeptember 2024
3 Szeptember 2024
17 Augusztus 2024
7 Augusztus 2024
6 Augusztus 2024
4 Augusztus 2024
Útmutatók nincs kategorizálva
- nincs kategorizálva Kunft
- nincs kategorizálva Testboy
- nincs kategorizálva Jetway
- nincs kategorizálva Bora
- nincs kategorizálva Brinno
- nincs kategorizálva Nature2
- nincs kategorizálva Traco Power
- nincs kategorizálva Cudy
- nincs kategorizálva Germania
- nincs kategorizálva Choice
- nincs kategorizálva Lumag
- nincs kategorizálva Serpent
- nincs kategorizálva Toomax
- nincs kategorizálva Louroe Electronics
- nincs kategorizálva Ontech
Legújabb útmutatók nincs kategorizálva
10 Április 2025
10 Április 2025
10 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025