Használati útmutató Jensen MPR420

Jensen Vevő MPR420

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Jensen MPR420 (14 oldal) a Vevő kategóriában. Ezt az útmutatót 12 ember találta hasznosnak és 6.5 felhasználó értékelte átlagosan 4.3 csillagra

Oldal 1/14
INSTALLATION/OWNER'S MANUAL
AM/FM Receiver with Bluetooth
MPR420
2
MPR420 INSTALLATION
Preparation
Please read entire manual before installation.
Before You Start
Disconnect negative battery terminal. Consult a qualified technician for instructions.
Avoid installing the unit where it would be subject to high temperatures, such as from
direct sunlight, or where it would be subject to dust, dirt or excessive vibration.
Getting Started
• Remove trim ring from unit.
• Insert the supplied keys into the slots as shown, and slide the unit out of the mounting
sleeve.
• Install mounting sleeve into opening, bending tabs to secure.
• Connect wiring harness and antenna. Consult a qualified technician if you are unsure.
• Certain vehicles may require an installation kit and/or wiring
harness adapter (sold separately).
• Test for correct operation and slide into mounting sleeve to secure.
• Snap trim ring into place.
TYPICAL FRONT-LOAD
MOUNTING METHOD
3
MPR420 INSTALLATION
Wiring Diagram
FUSE
43#DPS DJF#I xvh
Antenna
Connector
When replacing the
fuse, make sure new
fuse is the correct type
and amperage. Using
an incorrect fuse could
damage the radio.
The unit uses
one 10 amp ATC fuse
located beside the wiring
connector.

Termékspecifikációk

Márka: Jensen
Kategória: Vevő
Modell: MPR420

Szüksége van segítségre?

Ha segítségre van szüksége Jensen MPR420, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek