Használati útmutató JL Audio Stealthbox SB-POL-ACE/10TW1

JL Audio nincs kategorizálva Stealthbox SB-POL-ACE/10TW1

Olvassa el alább 📖 a magyar nyelvű használati útmutatót JL Audio Stealthbox SB-POL-ACE/10TW1 (5 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 8 ember találta hasznosnak és 4.5 felhasználó értékelte átlagosan 4.8 csillagra

Letöltés PDF

Oldal 1/5

Continued on Next Page

SB-POL-ACE/10TW1 INSTR_SKU# 011454

Thank you for choosing a JL Audio Stealthbox® for your automotive sound system.

With proper installation, your new vehicle-specific enclosed subwoofer system

will deliver years of listening pleasure.

We strongly recommend that you have your new Stealthbox® installed by your

authorized JL Audio dealer. The installation professionals employed by your

dealer have the necessary tools and experience to disassemble and reassemble

your vehicle properly. If you prefer to perform your own installation, please read

this installation guide completely before beginning the process.

If you choose to perform the installation yourself, it is absolutely

vital that the Stealthbox® be properly mounted to the vehicle

according to these instructions. Failure to mount the enclosure

properly presents two problems:

1) The sub-bass performance will suffer due to the movement of the

enclosure caused by the force exerted by the woofer(s).

2) A loose enclosure presents a serious safety hazard in the event of a

collision or sudden deceleration.

INSTALLATION

DIFFICULT Y:

ESTIMATED TIME:

1 HOUR

OUT

Enclosure Type: Sealed

Driver Type: 10TW1-4

Nominal Impedance: 2 ohms

Continuous Power Handling: 600 watts (RMS method)

I N S T A L L A T I O N G U I D E

for the

SB-POL-ACE/10TW1

SKU# 94628

2015 & Up Polaris Ace, Ace 570, & Ace 570 SP

I N C LUD E D H A R D W A R E

Continued on Next Page

Page 2 • JL Audio, Inc., 2016

SB-POL-ACE/10TW1 INSTR_SKU# 011454

Note: For optimum performance, JL Audio recommends applying the included Foam Strips (or sound damping material) to surrounding plastic panels to reduce unwanted vibrations.

* Pre-installed on enclosure

BOM ID Qty SKU Description

1 2 153714 1/4 - 20 x 1” Stainless Steel Button Head Screw

2 2 153716 1/4” Stainless Steel Split Lock Washer

3 2 153713 Stainless Steel Cushion Clamp

4 2 153717 M8 - 1.25 Nylon Lock Nut

5 2 153718 M8 - 1.25 x 40mm Flange Head Cap Screw

6* 2 153709 Rubber Bumper

7* 2 153715 #8 x 3/4” Phillips Pan Head Stainless Steel Screw

- 1 150249 Foam Strips (not shown)

P O W E R R E C O M M E N D AT I O N

JL Audio recommends high quality ampliers such as the JL Audio MX500/1. The diagram below shows the recommended crossover settings for the MX500/1. For a detailed description of the

amplier settings, consult the owner’s manual for the amplier. If another amplier is being used, please reference this illustration and use similar settings on that amplier.

C O N N E C T I O N S

Using quality power, signal, and speaker wire is essential in ensuring the performance of your Stealthbox®. JL Audio recommends using a 4 AWG power kit such as the XD-PCS4-1B for your

Stealthbox® amplier. Other kits are available should you be using more than one amplier. Signal wire such as the JL Audio Premium Audio Interconnect Cables should be used to provide signal for