Használati útmutató JL Audio Stealthbox SB-T-4RNRG5/10TW3

JL Audio nincs kategorizálva Stealthbox SB-T-4RNRG5/10TW3

Olvassa el alább 📖 a magyar nyelvű használati útmutatót JL Audio Stealthbox SB-T-4RNRG5/10TW3 (7 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 12 ember találta hasznosnak és 6.5 felhasználó értékelte átlagosan 4.3 csillagra

Letöltés PDF

Oldal 1/7

I N S T A L L A T I O N G U I D E

for the

SB-T-4RNRG5/10TW3

SKU# 94685

2010 & Up Toyota 4Runner

Enclosure Type: Sealed

Driver Type: 10TW3-D4

Nominal Impedance: 2 ohms

Continuous Power Handling: 400 watts (RMS method)

Continued on Next Page

SB-T-4RNRG5/10TW3 INSTR_SKU# 011555

• Installation requires appropriate tools and safety equipment.

Professional installation is recommended.

• If you prefer to perform your own installation, please read this

installation guide completely before beginning.

• Before cutting or drilling, check for potential obstacles behind

mounting surfaces.

• Mount this product securely to prevent damage or injury in

severe conditions.

INSTALLATION

DIFFICULTY:

EST IMATED T IME:

2 HOURS

OUT

I N C LUD E D H A R D WA R E

3 6

Continued on Next Page

Page 2 • JL Audio, Inc., 2021

SB-T-4RNRG5/10TW3 INSTR_SKU# 011555

BOM ID DescriptionQty SKU

1 3 154188 M6 x 1 mm, 25 mm Hex Head Screw

2 13 150066 1/4” Split Lock Washer

3 13 150068 1/4” Flat Washer

4 1 154190 Front Bracket

5 2 152191 Top/Bottom Bracket

6 9 151137 1/4” - 20 x 1” Hex Head Screw

7 1 154189 1/4” - 20 x 3/4” Hex Head Screw

8 2 151164 1/4 - 20 U-Nut

9 1 154192 Side Bracket

10 1 154187 Grille Panel (not shown)

P O W E R R E C O M M E N D AT I O N

JL Audio recommends high quality ampliers such as the JL Audio XD300/1v2. The diagram below shows the recommended crossover settings for the XD300/1v2. For a detailed description of the

amplier settings, consult the owner’s manual for the amplier. If another amplier is being used, please reference this illustration and use similar settings on that amplier.

Rem. |

Oset | Signal

Input Voltage

Low | High

Turn-On Mode

Monoblock Subwoofer Amplifier

C O N N E C T I O N S

Using quality power, signal, and speaker wire is essential in ensuring the performance of your Stealthbox®. JL Audio recommends using a 4 AWG power kit such as the XD-PCS4-1B for your

Stealthbox® amplier. Other kits are available should you be using more than one amplier. Signal wire such as the JL Audio Premium Audio Interconnect Cables should be used to provide signal for