Használati útmutató Jonard Tools FLS-55

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Jonard Tools FLS-55 (2 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 15 ember találta hasznosnak és 8 felhasználó értékelte átlagosan 4.7 csillagra

Oldal 1/2
FLS-55
SINGLE-MODE & MULTI-MODE
FIBER OPTIC LIGHT SOURCE
INSTRUCTION MANUAL
6. Maintenance:
6.1 If the Light Source is not used for a long time, the light output port must be
protected with the dustproof cover.
6.2 When the Fiber Optic Light Source is used for a long period of time, the output port
may get dirty, which results in the output power decreasing. If there is a
and alcohol. If it cannot be cleaned, please send it to the manufacturer for a
replacement.
6.3 If you are not planning to use the (FW-5) Light Source for a long period of time,
remove the batteries to prevent leakage.
contact the manufacturer.
6.5 DO NOT look into the Light Source adapters directly while the light source is on.
The laser output will damage your eyes.
7. Trouble-shooting:
1 The output light is unstable or
decreases rapidly while operation.
Replace the batteries.
2 Output power is fluctuating. Try warming-up the device for 15 minutes,
then use it.
3 The output port is dirty. Clean the connector with a cotton swab and
alcohol.
4 The device turns off automatically
after 10-15 minutes.
While the device is powered ON, press the
ON/OFF button once. The symbol in the
top-left corner will disappear, indicating the
auto-off feature has been turned off.
No. Problem Measures

Termékspecifikációk

Márka: Jonard Tools
Kategória: nincs kategorizálva
Modell: FLS-55

Szüksége van segítségre?

Ha segítségre van szüksége Jonard Tools FLS-55, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek