Használati útmutató Joy-It SEN-IR-TEMP

Joy-It hőmérő SEN-IR-TEMP

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Joy-It SEN-IR-TEMP (6 oldal) a hőmérő kategóriában. Ezt az útmutatót 14 ember találta hasznosnak és 7.5 felhasználó értékelte átlagosan 4.1 csillagra

Oldal 1/6
INFRARED THERMOMETER
Infrared sensor module for non-contact temperature measurements
Joy-IT powered by SIMAC Electronics GmbH - Pascalstr. 8 - 47506 Neukirchen-Vluyn - www.joy-it.net
Dear customer, thank you for choosing our product. In the In the following,
we will show you what you need to bear in mind during commissioning and
use.
Should you encounter any unexpected problems during use, please feel free
to contact us.
This infrared sensor module uses the MLX90614 sensor and enables
non-contact temperature measurements. The control is particularly
simple via the I2C interface and is thus possible with a wide variety of
microcontrollers and single board computers.
First, connect the module to your Arduino as follows:
1. GENERAL INFORMATION
2. BASICS
3. APPLICATION EXAMPLE ARDUINO
For usage, we recommend to use the MLX90614 Library from Adafruit. To
install this, rst open the library manager in your Arduino IDE under Sketch
Include Library Manage Libraries .
Here, type in the search box and install the library titled MLX90614 Adafruit
MLX90614 Library.
A suitable example program is already included in the library. Open this
under File Examples mlxtest Adafruit MLX90614 Library . Transfer
the code sample to your Arduino and open the serial monitor to display the
measurement outputs.
ARDUINO INFRARED THERMOMETER
5 V
GND
SDA (D18)
VIN
GND
SDA
SCL (D19) SCL
First connect the module to your Raspberry Pi as follows:
4. APPLICATION EXAMPLE RASPBERRY PI

Termékspecifikációk

Márka: Joy-It
Kategória: hőmérő
Modell: SEN-IR-TEMP

Szüksége van segítségre?

Ha segítségre van szüksége Joy-It SEN-IR-TEMP, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek