Használati útmutató Joy-It SEN-VIB01

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Joy-It SEN-VIB01 (7 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 4 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/7
SEN VIB01-
Analog piezoelectric vibration sensor
1. GENERAL INFORMATION
Dear customer,
thank you very much for choosing our product.
In the following, we will introduce you to what to observe while starting
up and using this product.
Should you encounter any unexpected problems during use, please do
not hesitate to contact us.
2. INTRODUCTION
Vibrations that aect the sensor generate a voltage signal due to the
piezoelectric eect depending on the strength of the vibration.
Therefore, you do not need a supply voltage for the sensor, but only the
voltage at the signal pin of the sensor has to be measured by using an
analog digital converter.-
Arduino SEN VIB01 -
GND G
- NC
A0 S
3. USE WITH THE ARDUINO
3.1 Wiring
3.2 Code example
We provide a code example for you to test your sensor. Before uploading,
make sure that the correct and are set in your Arduino IDE Board Port
under .Tools
The sensor generates a voltage from the vibration applied to it.
The following code will give you the current output voltage of the sensor.
The higher the applied vibration, the higher the output voltage.
void setup() {
// put your setup code here, to run once:
Serial.begin( );115200
}
void loop() {
// put your main code here, to run repeatedly:
sensorValue = analogRead(A0);int
voltage = sensorValue * ( );float 5.0 / 1023.0
Serial.println(voltage);
}

Termékspecifikációk

Márka: Joy-It
Kategória: nincs kategorizálva
Modell: SEN-VIB01

Szüksége van segítségre?

Ha segítségre van szüksége Joy-It SEN-VIB01, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók nincs kategorizálva Joy-It

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva

MOZA

MOZA SR-P Útmutató

10 Április 2025
CaterChef

CaterChef 445001 Útmutató

9 Április 2025
IFM

IFM E40581 Útmutató

9 Április 2025
Livn

Livn Bolt Útmutató

9 Április 2025
Livn

Livn Beats Útmutató

9 Április 2025
IFM

IFM O3R252 Útmutató

9 Április 2025