Használati útmutató Juki DLU-5494N-7
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Juki DLU-5494N-7 (52 oldal) a varrógép kategóriában. Ezt az útmutatót 10 ember találta hasznosnak és 5.5 felhasználó értékelte átlagosan 4.6 csillagra
Oldal 1/52
INSTRUCTION MANUAL
DLU-5494N-7/SC-922/M51N/IT-100A
i
CONTENTS
1. PREFACE...................................................................................................................................... 1
2. SET-UP .......................................................................................................................................... 1
(1) Installing the motor unit 1 .......................................................................................................................
(2) Installing the control box 2 .....................................................................................................................
(3) Installing the belt 2 ..................................................................................................................................
(4) Adjusting the pulley cover 3 ...................................................................................................................
(5) Installation and adjustment for the protecting pin and the belt slip-off preventing bracket 4 .........
(6) Connecting the cords 5 ...........................................................................................................................
(7) Attaching the connecting rod 13 ............................................................................................................
(8) Installing the operation display panel 14 ...............................................................................................
(9) How to use the operation display panel 14 ...........................................................................................
(10) Adjusting the bottom feed pitch display 15 .........................................................................................
3. INSTALLING THE OPERATION PANEL 15 ....................................................................................
4. HOW TO USE THE OPERATION PANEL .................................................................................. 16
(1) Names and functions of each components 16 ......................................................................................
(2) Adjusting the contrast of the operation panel display 17 ....................................................................
(3) Production control switch connecting connector 18 ...........................................................................
(4) USB port 18 ..............................................................................................................................................
5. SCREEN LIST 19 .............................................................................................................................
(1) Fundamental screen list 19 .....................................................................................................................
(2) Pop-up list 20 ...........................................................................................................................................
(3) Other screens 21 ......................................................................................................................................
(4) Transition of screen 22 ............................................................................................................................
6. OPERATING PROCEDURE OF THE SEWING PATTERN 23 ........................................................
(1) Selecting procedure of the sewing pattern 23 ......................................................................................
(2) Editing procedure of the sewing pattern 23 ..........................................................................................
(3) Teaching mode 26 ....................................................................................................................................
(4) Selecting the sleeve to be sewn 26 ........................................................................................................
(5) Selection of the alternate sewing 27 ......................................................................................................
(6) Insertion and deletion of the step 28 .....................................................................................................
(7) Operating procedure of the number of stitches of the reverse stitching 29 ......................................
7. PATTERN OPERATION 30 ..............................................................................................................
(1) Sewing pattern register 30 ......................................................................................................................
(2) Copy of the sewing pattern 32 ...............................................................................................................
(3) Deletion of the sewing pattern 33 ...........................................................................................................
8. HOW TO USE THE BOBBIN THREAD COUNTER 34 ...................................................................
9. NO. OF PCS. COUNTER ............................................................................................................ 35
10. PRODUCTION SUPPORT FUNCTION .................................................................................... 35
11. BOTTOM FEED AMOUNT DISPLAY ........................................................................................ 36
12. RE-SEWING SWITCH ............................................................................................................... 36
13. NEEDLE UP/DOWN COMPENSATION SWITCH .................................................................... 36
14. ON/OFF SWITCH OF THE MATERIAL EDGE SENSOR 37 ...................................................
15. AUTOMATIC THREAD TRIMMING SWITCH ..................................................................... 37
16. ONE-SHOT AUTOMATIC STITCHING SWITCH ................................................................ 37
17. THREAD TRIMMING PROHIBITION SWITCH ................................................................... 38
18. KEY-LOCK FUNCTION SETTING ............................................................................................ 38
19. INFORMATION ......................................................................................................................... 39
(1) Information operator level 39 ..................................................................................................................
(2) Setting for functions 42 ...........................................................................................................................
(3) External interface 47 ................................................................................................................................
20. ERROR DISPLAY 47 .....................................................................................................................
(1) Error code list (Error display in panel) 48 .............................................................................................
– 1 –
For setup or handling of DLU-5494N-7 (1-needle, bottom and variable top feed lockstitch machine with auto-
matic thread trimmer), refer to the Instruction Manual for DLU-5494N-7.
In addition, for the details of handling of SC-922 (sewing machine controller) and IT-100, similarly, refer to the
respective Instruction Manuals.
The SC-922 can be used with the direct-motor type machine head as a stand-alone control box.
It can also be used with the belt-driven type machine head by installing on the motor unit.
Install the control box on the motor unit following the instructions given below.
2. SET-UP
1. PREFACE
❶
❷
❸
❹
❶
(1) Installing the motor unit
Install the motor unit on the table with the tting bolt
(asm.) supplied with the unit as accessories.
At this time, insert the nuts and washers supplied
with the unit as accessories as shown in the gure
so that the motor unit can be securely xed on the
table.
1) Press three bolts ❶ supplied with the unit as
accessories into the motor hanging bolt hole in
the table and x them.
2) Temporarily tighten convex washer ❷, spring
washer ❸ and nut ❹ on the side where two bolts
are attached.
3) Hang the motor unit to the washer which has
been temporarily tightened, and attach convex
washer ❷, spring washer ❸ and nut ❹ to the
other bolt on the opposite side.
4) After adjusting the installing position of the motor,
securely tighten the respective nuts ❹.
Termékspecifikációk
| Márka: | Juki |
| Kategória: | varrógép |
| Modell: | DLU-5494N-7 |
Szüksége van segítségre?
Ha segítségre van szüksége Juki DLU-5494N-7, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók varrógép Juki
12 Január 2025
31 December 2025
31 December 2025
31 December 2025
14 Október 2024
5 Október 2024
2 Október 2024
27 Szeptember 2024
18 Szeptember 2024
17 Szeptember 2024
Útmutatók varrógép
- varrógép Husqvarna
- varrógép RCE
- varrógép Mellerware
- varrógép TriStar
- varrógép Bernina
- varrógép Empisal
- varrógép Prince
- varrógép Siemssen
- varrógép Brother
- varrógép Mediashop
- varrógép Singer
- varrógép Privileg
- varrógép Husqvarna-Viking
- varrógép SilverCrest
- varrógép Janome
Legújabb útmutatók varrógép
15 Január 2025
14 Január 2025
14 Január 2025
14 Január 2025
13 Január 2025
12 Január 2025
12 Január 2025
12 Január 2025
12 Január 2025
12 Január 2025