Használati útmutató Juki TC16

Juki varrógép TC16

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Juki TC16 (16 oldal) a varrógép kategóriában. Ezt az útmutatót 21 ember találta hasznosnak és 11 felhasználó értékelte átlagosan 4.9 csillagra

Letöltés PDF

Oldal 1/16

ENGLISH

TC16

INSTRUCTION MANUAL

CAUTION

This Instruction Manual is intended for the TC16. To use this product when it is installed on a

machine (sewing machine), make sure to read and fully understand the “IMPORTANT SAFETY

INSTRUCTIONS” provided in the Instruction Manual for the machine on which this product is to

be installed in advance.

For a clearer view of the TC16 illustrations of the machine (sewing machine) are simplied, and

illustrations of some of the safety devices are partially omitted.

Read safety instructions carefully and understand them before using.

Retain this Instruction Manual for future reference.

CONTENTS

Ⅰ . SPECIFICATIONS 1 .................................................................................................................

Ⅱ . INSTALLATION OF THE DEVICE 2 ........................................................................................

1. Components of device (components packed together with a single unit of device at the time of

delivery) 2 .................................................................................................................................................

(1) TC16A Type with control box (220 to 440V) 2 ..........................................................................................

(2) TC16B Type with control box (100 to 240V) 2 ..........................................................................................

(3) TC16C Type for servo-motor 2 ..................................................................................................................

2. Installing the control box (for TC16A and TC16B only) 3 ....................................................................

3. Replacing procedure of the cloth plate (left) when installing TC16 after setting up the sewing

machine 3 .................................................................................................................................................

4. Installing the tape guide (auxiliary presser) 3 .......................................................................................

5. Installing the tape cutter unit 4 ...............................................................................................................

6. Connecting the cord 4 .............................................................................................................................

(1) TC16A,TC16B (with control box) types 4 .................................................................................................

(2) Setting the supply voltage 4 ......................................................................................................................

(3) TC16C (for servo-motor) type 5 ................................................................................................................

7. Installation and setting SC-921 (for TC16C only) 6 ..............................................................................

(1) Installing procedure 6 ................................................................................................................................

(2) Change of the setting 8 .............................................................................................................................

Ⅲ . OPERATION 10 ........................................................................................................................

Ⅵ . ADJUSTMENT OF COMPONENTS.....................................................................................11

1. Replacing the moving knife or the counter knife ............................................................................ 11

2. Adjusting the angle of the counter knife 12 ..........................................................................................

3. Adjusting the lift height of the moving knife 12 ....................................................................................

Ⅴ . TEST CUT 13 ...........................................................................................................................