Használati útmutató JVC KY-PZ100BE
JVC
Térfigyelő kamera
KY-PZ100BE
Olvassa el alább 📖 a magyar nyelvű használati útmutatót JVC KY-PZ100BE (125 oldal) a Térfigyelő kamera kategóriában. Ezt az útmutatót 11 ember találta hasznosnak és 6 felhasználó értékelte átlagosan 4.5 csillagra
Oldal 1/125
JVC Camcorder Web API Reference
Version 1.17
JVC KENWOOD Corporation
Page 1
Conditions for the use of this document
Use of this document is permitted only if you agree to the following terms.
JVCKENWOOD CORPORATION SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. JVCKENWOOD
CORPORATION HAS NO OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR
MODIFICATIONS.
THIS DOCUMENT DESCRIBES APPLICATION PROGRAMMING INTERFACE TO CONTROL JVC CAMERA RECORDERS
VIA NETWORK, AND IT SHALL NOT BE USED FOR ANY OTHER PURPOSE.
Page 2
History
Version
Outline
1.00 First release
1.01 Added GY-HM660 to the command table
Added "3.1.15 Set streaming server settings(RTP)" command only GY-HM660.
Added PcrJitter parameter in "3.1.18 Get streaming server settings" and "3.1.19 Set streaming server settings(UDP)" commands
1.02
Added "3.1.14 Set streaming server settings(RTP)" command for all cameras.
Type "TCP" is effective in "GY-HM650" and "GY-HM660" in command with a streaming type parameter.
Added "Variable Gain" parameter to "3.3.1 Get Camera Status" and "3.3.6 Set Web Event" for "GY-LS300".
1.03
Type "TCP" is effective in "GY-HM650" in command with a streaming type parameter.
Type "UDPN" and "UDPL" are effective in "GY-HM660" in command with a streaming type parameter.
1.04 Supported KY-PZ100 newly.
Added "3.1.3 Set streaming framerate" command for "KY-PZ100".
Added "3.1.6 Available streaming framerate settings" command for "KY-PZ100".
Added "3.4. PTZ Camera Support Command" for "KY-PZ100".
Added "3.5. How to acquire JPEG data" for "KY-PZ100".
1.05 Added "3.1.3 Set streaming framerate" command for "GY-HM200", "GY-LS300", "GY-HM8x0", and "GY-HM660".
Added "3.1.6 Available streaming framerate settings" command for "GY-HM200", "GY-LS300", "GY-HM8x0", and "GY-HM660".
Added "3.5. How to acquire JPEG data" for "GY-HM200", "GY-LS300", "GY-HM8x0", and "GY-HM660".
Added "3.6. How to use interruptible feedback function" for "GY-HM660".
1.06 Error correction. 2.1.1.
Another client is able to connect while first client is using API interface.
3.2.2 SessionRenewal command has become obsolete.
Added "3.6. How to use interruptible feedback function" for "GY-HM8x0".
Type "UDPN" and "UDPL" are effective in "GY-HM8x0" in command with a streaming type parameter
of "3.1.7 Available streaming bitrate settings" command.
1.07 Error correction. "3.1.10 Get streaming server settings".
Revised wrong parameters. They are effective to all models.
Error correction. "3.3.6. Set Web Button Event".
Some parameters are not supported on "KY-PZ100".
Added "MasterBlack" parameters to "3.3.1 Get Camera Status" and "3.3.6 Set Web Event"
for "GY-HM8x0", "GY-HM660", and "GY-HM200".
Added "Detail" parameters to "3.3.1 Get Camera Status" and "3.3.6 Set Web Event" for "GY-HM8x0", "GY-HM660", and "GY-HM200".
Added "3.4.3 Zoom switch operation" command for "GY-HM8x0", "GY-HM660", and "GY-HM200".
Added "3.3.10 Seesaw switch operation" command for "GY-HM8x0", "GY-HM660", and "GY-HM200".
Added Gain event "Up1"/"Down1" parameters to "3.3.6 Set Web Event" for "GY-HM8x0", "GY-HM660", and "GY-HM200".
Added target models "GY-HM8x0", "GY-HM660", and "GY-HM200" to MenuStatus of "3.3.1 Get Camera Status"
Added "3.7. How to control tally system" description for "GY-HM8x0", "GY-HM660", "GY-HM200", and "KY-PZ100".
Changed ""3.3.5. Tally lamp control" description correspond to it.
1.08 Added "Serial" parameter to "3.2.1. Get System Information" for "GY-HM660","GY-HM8x0","GY-HM200", and "KY-PZ100".
Added "3.2.6 Get NTP Status","3.2.7 Set NTP Server", and "3,2,8 Set NTP settings" Commands
for "GY-HM660","GY-HM8x0","GY-HM200", and "KY-PZ100".
Supported GY-HM25x newly.
Error correction.
Added "Whb" "Status" parameter to "3.3.1. Get camera status".
Changed "3.3.1. Get camera status". Parameter ("Enable" "Streaming" "On/Off") is not effective in "GY-HM200" and "GY-HM25x".
1.09 Added "Serial" parameter to "3.2.1. Get System Information" for "GY-HM650".
Added "3.5. How to acquire JPEG data" for "GY-HM650".
Supported GY-HC900 newly.
1.10 for "GY-HC900" updates as below.
Added some resolution and bitrate parameters to "3.1. Streaming Setting Command".
Added "Smpte2022Fec" to "3.1.10. Get streaming server settings" and "3.1.16. Set streaming server settings(RTP)".
Added "AdaptiveBitrate" to "3.1.10. Get streaming server settings" and "3.1.14. Set streaming server settings(ZIXI)" .
Added "3.8. Return over IP Command" for "GY-HC900".
Added "Resolution" and "FrameRate" to "3.8.3. GetReturnOverIpServerSettings" and "3.8.4. SetReturnOverIpServerSettings(RTSP/Zixi)".
Added "3.8.3.1. AvailableTypeOfReturnOverIP" and "3.8.3.2. AvailableFrameRateOfReturnOverIP" commands.
Added "IrisBar" parameter to "3.3.7. Set Web Slider Event".
Added "Position(Iris)" parameter "3.3.1. Get camera status".
Added "PCR Mode" to "3.1.10. Get streaming server settings" and "3.1.16. Set streaming server settings(UDP/Zixi/RTP)" .
Added "Overlay" and "Tagging" parameter to 3.2.1. Get System Information.
Error correction. GY-HC900 does not support "Iris PushAuto" of "3.3.6 Set Web Event".
1.11 Supported GY-HC5x0 newly.
Added "3.2.6. Get NTP Status" and "3.2.7. Set NTP Server" for "GY-HC5x0".
Added SRT parameter for "GY-HC5x0".
"3.2.1. Get System Information", "3.1.7. Available streaming bitrate settings",
"3.1.10. Get streaming server settings", and "3.1.18. Set streaming server settings(SRT)".
Added "PCR Mode" parameter to "3.1.10. Get streaming server settings"
and "3.1.16.Set streaming server settings(UDP/Zixi/RTP)" for GY-HC5x0.
Added "RTMPS" protocol for "GY-HC5x0".
"3.1.7. Available streaming bitrate settings" and "3.1.10. Get streaming server settings"
and "3.1.16. Set streaming server settings(RTMPS)".
1.12 Added "3.2.6. Get NTP Status" and "3.2.7. Set NTP Server" for "GY-HC900".
Added SRT parameter for "GY-HC900".
"3.2.1. Get System Information", "3.1.7. Available streaming bitrate settings",
"3.1.10. Get streaming server settings", and "3.1.18. Set streaming server settings(SRT)".
Added "3.8. Return over IP Command" 30p/25p parameter for "GY-HC5x0".
Added "IrisBar" parameter to "3.3.7. Set Web Slider Event" for "GY-HC5x0".
Added "Position(Iris)" parameter "3.3.1. Get camera status" for "GY-HC5x0".
Added "KA_EN200" parameter to 3.2.1. Get System Information for "GY-HC5x0" and "GY-HC900".
Added "422 60p" and "422 50p" parameters to each available streaming settings
for "GY-HC5x0" and "GY-HC900" when "KA-EN200" is enabled.
"3.1.1. Get streaming settings" and other available settings.
Added "EXT slot information" to "3.3.1. Get camera status" for "GY-HC900".
Page 3
Termékspecifikációk
| Márka: | JVC |
| Kategória: | Térfigyelő kamera |
| Modell: | KY-PZ100BE |
Szüksége van segítségre?
Ha segítségre van szüksége JVC KY-PZ100BE, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók Térfigyelő kamera JVC
20 Szeptember 2024
8 Augusztus 2024
5 Augusztus 2024
5 Augusztus 2024
4 Augusztus 2024
4 Augusztus 2024
1 Augusztus 2024
31 Július 2024
28 Július 2024
27 Július 2024
Útmutatók Térfigyelő kamera
- Térfigyelő kamera Pioneer
- Térfigyelő kamera Whistler
- Térfigyelő kamera SereneLife
- Térfigyelő kamera B & S Technology
- Térfigyelő kamera SPC
- Térfigyelő kamera Kguard
- Térfigyelő kamera Lanberg
- Térfigyelő kamera Intellinet
- Térfigyelő kamera Waeco
- Térfigyelő kamera Hive
- Térfigyelő kamera Blaupunkt
- Térfigyelő kamera Anker
- Térfigyelő kamera Nexxt
- Térfigyelő kamera LevelOne
- Térfigyelő kamera Alula
Legújabb útmutatók Térfigyelő kamera
6 Április 2025
5 Április 2025
5 Április 2025
15 Január 2025
14 Január 2025
13 Január 2025
13 Január 2025
13 Január 2025
13 Január 2025
13 Január 2025