Használati útmutató Kathrein ZSO 181

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Kathrein ZSO 181 (2 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 15 ember találta hasznosnak és 8 felhasználó értékelte átlagosan 4.3 csillagra

Oldal 1/2
1 / 2
ZSO 181 23710015
Support frame for sat antennas
Intended use
The ZSO 181 support frame is intended exclusively for
securing a sat antenna (such as the CAS 180) to the
ground.
Any use other than this will invalidate the warranty or
guarantee.
About these instructions
This document is part of the product. These instructions
describe how to install and connect the ZSO 181 support
frame.
Do not install and use the device until you have read
and understood this document.
Keep this document for reference throughout the life
of the device. Pass this document on to any subse-
quent owners and users.
The latest version of these instructions for use can be
found on our website: www.kathrein-ds.com
Securing the support frame
There are two main ways in which the support frame can be secured. These require on the one hand the installation of
IPB 200 beams (see Fig. 2) and on the other hand the laying of a flat concrete slab (see Fig. 3).
Fig. 1: ZSO 181
Slab, IPB 200 and clamping plates
Fig. 2: Installation on a slab with IPB 200, using clamping plates
Slab and anchor bolts with anchor rod (M24)
When setting up the ZSO 181 support frame on concrete using anchor bolts and an anchor rod
1), we recommend you use
the support frame as a template to drill the necessary eight anchor holes. The theoretical dimensions are shown in Fig.
3.
1) anchor bolts Upat UKA 3 - M24:
Please comply with the current "General building approval
conditions"
Fig. 3: Installation on a slab with anchor bolts and an anchor rod

Termékspecifikációk

Márka: Kathrein
Kategória: nincs kategorizálva
Modell: ZSO 181

Szüksége van segítségre?

Ha segítségre van szüksége Kathrein ZSO 181, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek