Használati útmutató Kenwood c 929

Kenwood autórádió c 929

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Kenwood c 929 (20 oldal) a autórádió kategóriában. Ezt az útmutatót 5 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF

Oldal 1/20

C929

COMPACT DISC AUTO CHANGER

INSTRUCTION MANUAL

CHANGEUR AUTOMATIQUE DE DISQUES COMPACTS

MODE D’EMPLOI

CAMBIADOR AUTOMATICO DE DISCOS COMPACTOS

MANUAL DE INSTRUCCIONES

Take the time to read through this instruction manual.

Familiarity with installation and operation procedures will help

you obtain the best performance from your new compact disc

auto changer.

For your records

Record the serial number, found on the back of the unit, in the spaces

designated on the warranty card, and in the space provided below.

Refer to the model and serial numbers whenever you call upon your

KENWOOD dealer for information or service on the product.

Model C929 Serial number

CHANGER AUTOMÁTICO DE CDs

MANUAL DE INSTRUÇÕES

Warning

The marking of products using lasers

(Except for some areas)

The label is attached to the chassis/case and

says that the component uses laser beams that

have been classified as Class 1. It means that

the unit is using laser beams that are of a

weaker class. There is no danger of hazardous

radiation outside the unit.

Marquage des produits utilisant un

laser (Sauf pour certaines régions)

L’étiquette est attachée au chassis/boîtier de

l’appareil et indique que l’appareil utiliser des

rayons laser de classe 1. Cela signifie que

l’appareil utilise des rayons laser d’une classe

faible. Il n’y a pas de danger de radiation

accidentelle hors de l’appareil.

La marca del producto láser

Esta etiqueta está colocada al chasis/a la caja e

indica que el componente funciona con rayos

láser de classe1.

Esto significa que el aparato utiliza rayos láser

considerados como de clase débie. No existe

el peligro de que este aparato emita al exterior

una radiación peligrosa.

A marca dos produtos usando laser

(exceto para algumas áreas)

A etiqueta é presa no chassis/estojo e indica

que o componente utiliza raios laser,

classificados como sendo de Classe 1. Isto

significa que o aparelho está usando raios laser

que são de uma classe mais fraca. Não há

perigo de radiação maléfica fora do aparelho.

Use of controls or adjustments or performance

of procedures other than those specified herein

may result in hazardous radiation exposure.

In compliance with Federal Regulations,

following are reproductions of labels on, or

inside the product relating to laser product

safety.

Location : Rear Panel

FCC WARNING

This equipment may generate or use radio

frequency energy. Changes or modifications to

this equipment may cause harmful interference

unless the modifications are expressly approved

in the instruction manual. The user could lose

the authority to operate this equipment if an

unauthorized change or modification is made.

This equipment has been tested and found to

comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable

protection against harmful interference in a

residential installation. This equipment may

cause harmful interference to radio

communications, if it is not installed and used in

accordance with the instructions. However,

there is no guarantee that interference will not

occur in a particular installation. If this

equipment does cause harmful interference to

radio or television reception, which can be

determined by turning the equipment off and on,

the user is encouraged to try to correct the

interference by one or more of the following

measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the

equipment and receiver.

•Connect the equipment into an outlet on a

circuit different from that to which the receiver

is connected.

•Consult the dealer or an experienced radio/TV

technician for help.

This Class B digital apparatus meets all

requirements of the Canadian interference-

Causing Equipment Regulations.

Cet appareil numérique de la classe B respecte

toutes les exigences du Reglement sur le

matériel brouilleur du Canada.

REMARQUE

NOTE

2CAUTION

CLASS 1

LASER PRODUCT

CLASS 1

LASER PRODUCT

CLASS 1

LASER PRODUCT

CLASS 1

LASER PRODUCT

KENWOOD CORPORATION

2967-3, ISHIKAWA-CHO,

HACHIOJI-SHI

TOKYO, JAPAN

KENWOOD CORP. CERTIFIES THIS EQUIPMENT

CONFORMS TO DHHS REGULATIONS N0.21 CFR

1040. 10, CHAPTER I, SUBCHAPTER J.

Take the following precautions to prevent fire

and avoid personal injury :

• Check that no metal objects (coins, tools, etc.)

are left inside the unit to avoid short circuits.

• If you smell or see smoke, turn the power off

immediately and consult your Kenwood dealer.

Take the following precautions to keep the unit

in proper working order.

• Do not open the top or bottom cover.

• Do not install the unit in places it is exposed to

direct sunlight, high heat or humidity, water may

splash over it, or dust exists.

• Do not install the unit at a dusty place. If the unit

is installed at a dusty place, dust accumulates

inside the unit and unit may be damaged.

• When drilling a hole in the car to fix the

brackets, make sure not to damage the fuel

tank, brake tube, wiring harnesses, etc. on the

other side.

• If the unit is installed near speakers, the

speakers vibration may causes a sound skip.

Install the unit as far away as possible from the

speakers.

• If you have difficulty in installing this unit in your

vehicle, contact your Kenwood dealer.

• If it doesn't seem to be working properly, first

press the Reset button. If the malfunction

persists, consult your Kenwood dealer.

IMPORTANT INFORMATION

• This unit is NOT designed to be connected

directly to control units that are manufactured

and sold before 1994. If used with such units, an

optional CA-SD200 (sold separately) must be

used.

FAILURE TO FOLLOW THESE INSTRUCTIONS

MAY RESULT IN DAMAGE TO THIS UNIT AND

CONTROL UNIT.

• The disc name preset function can register

names of up to 100 discs using up to 12

characters for each disc name.

The availability of this function as well as the

number of discs which can be registered using

this function and the number of usable

characters may be variable depending on the

control unit in use.

Do Not Use Special Shape CDs

• Be sure to use round shape CDs only for this

unit and do not use any special shape CDs. Use

of special shape CDs may cause the unit to

malfunction.

• Be sure to use CDs with disc mark

only for this unit.

• CD-Rs and CD-RWs which have not undergone

finalization processing cannot be played. (For

more information on finalization processing, refer

to the manual for your CD-R/CD-RW writing

software or CD-R/CD-RW recorder.) Additionally,

depending on the recording status, it may prove

impossible to play certain CDs recorded on CD-R

or CD-RW.

Do Not Use CDs with Sticker on the

Labeled Side

• Do not use the CD with the label sticker stuck

on it.

Using such a CD may cause the CD to be

deformed and the sticker to peel off, resulting in

malfunction of the unit.

Cleaning the unit

• If the front panel is dirty, wipe it clean with a

silicon cloth or soft dry cloth with the power off.

Do not use hard cloths or paint thinner, alcohol,

or other volatile solvents. These may damage

external surfaces or remove indicator characters.

Lens fogging

• In cold climates, there may be a period after you

turn on your vehicle's heater when the lens that

guides the laser beam used in your CD player

fogs up. If this happens, you cannot play

compact discs. Take out discs and the fogging

will disappear. If it does not return to normal

after several hours, contact your Kenwood

dealer.

Heat protection

• In warm climates, when vehicles are left

standing in direct sunlight with the windows

closed, the temperature inside can rise above

60°C. The unit's protection circuits will then

display the message "HOLD" and prevent the

player from operating. Just open the windows

or turn on the air conditioning. As soon as the

"HOLD" message disappears, the player will

operate normally.

2CAUTION

NOTE

2CAUTION

2WARNING

Safety precautions

Termékspecifikációk

Márka:	Kenwood
Kategória:	autórádió
Modell:	c 929

Szüksége van segítségre?

Ha segítségre van szüksége Kenwood c 929, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek

Az Ön neve*

Az Ön e-mail címe*

Írja ide kérdését

Útmutatók autórádió Kenwood

Kenwood KMM-204 Útmutató

16 Január 2025

Kenwood KDC-130UG Útmutató

9 December 2024

Kenwood KMM-X705 Útmutató

15 Október 2024

Kenwood KDC-W6141UY Útmutató

22 Szeptember 2024

Kenwood KMR-350U Útmutató

20 Szeptember 2024

Kenwood KDC-3021A Útmutató

9 Szeptember 2024

Kenwood KDC-BT960DAB Útmutató

20 Augusztus 2024

Kenwood KMM-BT209 Útmutató

20 Augusztus 2024

Kenwood KDC-MP372BT Útmutató

19 Augusztus 2024

Kenwood KMR-D768BT Útmutató

19 Augusztus 2024

Útmutatók autórádió

Legújabb útmutatók autórádió

Muse M-1229 BT Útmutató

10 Április 2025

Grundig WKC 3201 RDS Útmutató

6 Április 2025

Philips CED232 Útmutató

30 Március 2025

Panasonic CQ-FX721P Útmutató

28 Március 2025

Blaupunkt Heidelberg 220 BT Útmutató

21 Március 2025

Blaupunkt London MP35 Útmutató

21 Március 2025

Audison srx 3 Útmutató

16 Január 2025

Audison lr 180 m Útmutató

16 Január 2025

Audison lr 435 xr Útmutató

16 Január 2025

Daewoo AKL 3010 Útmutató

16 Január 2025