Használati útmutató Kenwood KRK-10

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Kenwood KRK-10 (25 oldal) a rádió kategóriában. Ezt az útmutatót 14 ember találta hasznosnak és 4 felhasználó értékelte átlagosan 4.3 csillagra

CABLE

INSTRUCTION MANUAL

PRECAUTIONS

•The following product is exclusively for use with KENWOOD transceivers.

•To prevent possible accidents and damages, do not attempt to use this product with

other types of transceivers.

ABOUT PRODUCT

USB PROGRAMMING INTERFACE CABLE

•This product is the cable to connect KENWOOD transceivers and the PC.

•Install the UART driver or USB driver from the supplied CD to the PC.

PROGRAMMING INTERFACE CABLE

•This product is the cable to connect KENWOOD transceivers and the PC.

FILTERED CIGARETTE LIGHTER CORD

•The cigarette lighter cable allows you to supply power to your transceiver

from the cigarette lighter of your automobile.

•The cigarette lighter cable is equipped with a 2 A fuse. When the fuse

blows, replace it with a fuse of the same rating.

To cigarette

lighter socket

To transceiver

3.4 mm

Fuse (2A)

CAUTION:

●12 V DC ONLY

Serious damage may result to your transceiver if this cable is connected to a voltage

source greater than 16 V. Some vehicles have battery voltages of 24 V or greater.

REMOTE CONTROL KIT

•These products are the connection cable kits for installing the operation

panel of KENWOOD mobile transceivers separately.

B5A-1082-00

© 2015

Termékspecifikációk