Használati útmutató Kicker 46HDBL69

Kicker hi-fi rendszer 46HDBL69

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Kicker 46HDBL69 (13 oldal) a hi-fi rendszer kategóriában. Ezt az útmutatót 14 ember találta hasznosnak és 7.5 felhasználó értékelte átlagosan 4.7 csillagra

Letöltés PDF

Oldal 1/13

1. Remove the factory lids, latch, and hinge

assembly.

2. Install the factory latch and hinge assembly to

your new KICKER lids using the factory screws.

3. Install the speakers by rotating the speaker

from the back side of lid, through the opening of

the lid, positioning the speaker to line up with the

holes. Install the two front screws through the

speaker into the lid.

HDBL | HDBL69

HDBLVB | HDBLVB69

Motorcycle Lid Kit Installation Guide for Harley Davidson®

Motorcycles 2014–Present

Important: Over-tightening mounting fasteners may result in damage to your motorcycle. Please refer to your service manual for proper procedures and torque

speciﬁ cations. KICKER is not responsible for damage resulting from improper installation techniques. This kit may not be compatible with some aftermarket

head units. KICKER cannot be held responsible for any damage to painted surfaces during removal or addition of KICKER parts.

4. Place the bracket on the back side of the speaker. Install a bolt through the bracket and speaker from the back side, then

position the speaker nut on top and tighten. Using the factory screw, attach the outside of the bracket to the lid.

5. install the factory latch lever using the factory screw and supplied rubber grommet.