Használati útmutató Klark Teknik DN100 V2

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Klark Teknik DN100 V2 (5 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 15 ember találta hasznosnak.

Quick Start Guide

DN100

Active DI Box with Extended Dynamic Range

V 1.0

(EN)Controls

(1) BALANCED LINKED INPUTS – Connect instruments or

line-level equipment to either the ¼" TRS or XLR inputs.

The other ¼" connector can be used as a link-through to

pass the signal to an amplier. When only the XLR input is

used, an impedance of 20 kΩ optimizes use with line-level

sources, otherwise a nominal impedance of 1 MΩ is ideal for

instrument pickups.

(2) OUTPUT – Send the signal to a mixer or recording interface

via balanced XLR cable.

(3) PAD – Press to reduce the input signal by 20 dB for use with

hot signals.

(4) EARTH – Press to separate the input and output grounds,

potentially eliminating earth/ground loops between

equipment on dierent mains supplies.

(5) 48 V LED – Lights when the unit receives sucient phantom

power. Note that the DN100 must be powered to operate

correctly.

(1)

(2)(3)(4) (5)

Termékspecifikációk