Használati útmutató Klark Teknik DN100

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Klark Teknik DN100 (5 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 15 ember találta hasznosnak és 8 felhasználó értékelte átlagosan 4.7 csillagra

Oldal 1/5
Quick Start Guide
DN100
Active DI Box with Extended Dynamic Range
V 1.0
(EN) Controls
(1) BALANCED LINKED INPUTS – Connect instruments or
line-level equipment to either the ¼" TRS or XLR inputs.
The other ¼" connector can be used as a link-through to
pass the signal to an amplier. When only the XLR input is
used, an impedance of 20 kΩ optimizes use with line-level
sources, otherwise a nominal impedance of 1 MΩ is ideal for
instrument pickups.
(2) OUTPUT – Send the signal to a mixer or recording interface
via balanced XLR cable.
(3) PAD – Press to reduce the input signal by 20 dB for use with
hot signals.
(4) EARTH – Press to separate the input and output grounds,
potentially eliminating earth/ground loops between
equipment on dierent mains supplies.
(5) 48 V LED – Lights when the unit receives sucient phantom
power. Note that the DN100 must be powered to operate
correctly.
(1)
(2) (3) (4) (5)

Termékspecifikációk

Márka: Klark Teknik
Kategória: nincs kategorizálva
Modell: DN100

Szüksége van segítségre?

Ha segítségre van szüksége Klark Teknik DN100, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek