Használati útmutató Klipsch AWR-650-SM

Klipsch hangszóró AWR-650-SM

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Klipsch AWR-650-SM (4 oldal) a hangszóró kategóriában. Ezt az útmutatót 4 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/4
AWR-650-SM
Owner's Manual
+
+
+
+
+
+
–
–
–
White
Red
Black
Green
Klipsch All-Weather Rock Speakers
Thank you for your purchase of this Klipsch Rock Speaker. The
Klipsch All-Weather Rock speaker (AWR-650-SM) is a two-way, dual
channel design using a single high performance bass driver for the low
frequencies and a pair of Polymer dome high frequency tweeters for
wide, even coverage.
The AWR-650-SM can be configured as a single two channel speaker
or used in pairs as a single channel speaker. The AWR-650-SM is
constructed of durable weather proof materials such as a fiberglass
enclosure and powder coated aluminum grilles, a polymer woofer
cone and polymer dome tweeters. This ensures that the speaker will
look and sound good for years to come regardless of environmental
extremes.
Please be sure to fill out the warranty card included with this manual or
online at www.klipsch.com so we are better able to serve you.
Placement
The Klipsch All-Weather Rock speaker is perfect for lawns, gardens,
patios, decks or any other place where exposure to the elements
makes conventional loudspeaker usage unsuitable. Due to its aesthetic
design and up-tilted orientation, this model is designed for low or
ground level placement.
To achieve the best performance from a pair of AWR-650-SMs place
them on the same side of your intended listening area and space them
8 to 20 feet apart. For a higher quality stereo image some degree of
toe-in, toward the primary listening area, may be required to achieve
the desired effect.
If a single AWR-650-SM is connected in a two channel configuration it
is best to center the speaker on the preferred side for even coverage.
Some additional Bass will result if you place the speakers in a corner
or near a wall.
Connections
Important:
Proper connection of your speakers to your
amplifier is vital to obtaining good sound quality. Please
follow these directions carefully.
The AWR-650-SM is provided with a 4-conductor cable to be able to
connect either 1 or 2 channels. One input uses RED for positive and
GREEN for negative, the other uses WHITE for positive and BL ACK
for negative. When connecting only 1 channel to the AWR-650-SM
the RED and WHITE must be connected together for positive and
BLACK and GREEN together for negative. Positive(s) and negative(s)
on the speaker must be connected to the positive(s) and negative(s)
respectively for your receiver/amplifier for correct phasing.
Important:
Each channel on the AWR-650-SM has 8
ohm impedance. When joining the inputs for a 1 channel
connection as previously described and shown below, the
AWR-650-SM becomes a 4 ohm speaker. Make sure your
receiver/amplifier can accept a 4 ohm (which most can).
1
2 Channel Wiring
1 Channel Wiring
Wire Splicing
Unless the AWR-650-SM will be connected to an amplifier/receiver
directly using the 5’ lead, wire splicing to a separate set of high quality,
moisture resistant speaker cable will be required. Follow the following
steps to connect the AWR-650-SM to an amplifier/receiver as a single
channel speaker.
1. Strip away two to three inches of the AWR-650-SM 5' speaker lead
outer jacket away from the individual insulated conducts.
2. Strip one half inch from each of the 4 individual conductors.
3. Twist together the stripped ends of the AWR-650-SM BL ACK
(negative) wire AND the AWR-650-SM GREEN (negative) wire AND
the stripped end of the speaker wire connected to the negative
output of the desired channel of the amplifier/receiver.
4. Cap the three wire combination with a silicon filled wire nut. The
material inside the wire nut will protect the stripped ends of the wire
from moisture. If additional protection is desired, additional silicon
(sold separately) can be added to the bottom of the wire nut to
further seal the connection.
5. Repeat steps 3 & 4 for the positive connection of the same channel
using the AWR-650-SM RED (positive) wire AND the AWR-650-SM
WHITE (positive) wire and speaker wire connected to the positive
output of the amplifier/receiver.
To connect the AWR-650-SM as a dual channel stereo speaker
two additional wire nuts will be required (sold separately). Make 4
individual splices, referring to the diagram above, and always double
check that the positive leads of the AWR-650-SM are connected to
the positive outputs of the amplifier/receiver and the negative leads
of the AWR-650-SM are connected to the negative outputs of the
amplifier/receiver.
WARNING:
If channel 1 and 2 are wired out of phase,
the woofer will make little to no sound. This can damage the
woofer if left wired in this manner.
+
–
+
–
Green
Red
Black
White
Right Channel
Left Channel
Important: Before burying any portion of the completed
speaker assembly, verify the location of gas lines or buried
utility cables with your local utility company(s).
Important: Before running speaker cable through walls,
under patios or walkways, etc., check local building code
requirements. If you are not comfortable with any portion of the
installation, hire a qualified installer to perform those functions.
Securing Speaker
The AWR-650-SM includes a security eyelet on the underside of the
speaker. This permanent eyelet can be used to attach a security cable
or small chain for the added security.
Simply loop the security cable or chain through the eyelet underneath
the speaker enclosure and attach the other end to a fixed object.
Maintenance and Care
Your AWR-650-SM is designed to withstand the elements and be
placed outdoors year round. If cleaning is desired, simply use a damp
cloth to wipe down the outer surface of the speaker. Using chemical
cleaners is not recommended. Avoid spraying water from a hose or
sprinkler since this could damage speaker components, especially the
high performance tweeters. Cover the AWR-650-SM when applying
lawn fertilizer and chemicals.
Important: No user-serviceable parts inside. Refer all
servicing to qualified service personnel.
Limited Lifetime Warranty for Klipsch-Branded
In-Wall, In-Ceiling and Outdoor Speakers
Klipsch warrants to the original retail purchaser that this product is to
be free from defective materials and workmanship for the life of the
product, if it is properly used and maintained. If this product proves
defective in either material or workmanship, Klipsch, at its option,
will (a) repair the product, or ( b) replace the product, at no charge for
parts or labor. If the product model is no longer available and cannot
be repaired effectively or replaced with an identical model, Klipsch at
its sole option may replace the unit with a current model of equal or
greater value. In some cases, modification to the mounting surface
may be required where a new model is substituted. Klipsch assumes
no responsibility or liability for such modification. To obtain a repair
or replacement under the terms of this warranty, please contact our
customer service group at 1-800-KLIPSCH. You will be required to
submit a copy of the original receipt via fax or email. The receipt must
reflect that you are the original purchaser, the product was bought from
an authorized Klipsch retailer, and the product is still within warranty.
You will be issued a return authorization number (RA#) and asked to
ship the defective product, together with proof of purchase and RA#,
2
prepaid insured to the address set forth Klipsch: 137 Heampstead #278
Hope, AR 71801. Freight collect shipments will be refused. Risk of loss or
damage in transit is to be borne by the purchaser. Once Klipsch receives
the defective product, a repair or replacement order will be initiated.
Limitations:
• This limited warranty does not cover failure of the product
resulting from improper installation, misuse, abuse, acci-
dent, neglect, mishandling, or wear from ordinary use or
environmental deterioration.
• This limited warranty does not cover cosmetic damage,
including paint damage, or consequential damage to other
components or premises which may result for any reason
from the failure of the product.
• This limited warranty is null and void for products not used
in accordance with Klipsch’s instructions.
• This limited warranty is null and void for products with
altered or missing serial numbers and for products not pur-
chased from an authorized dealer.
• This limited warranty terminates if you sell or otherwise
transfer this product to another party.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND
YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE
TO STATE, JURISDICTION TO JURISDICTION OR COUNTRY TO
COUNTRY. KLIPSCH’S RESPONSIBILITY FOR MALFUNCTIONS AND
DEFECTS IN HARDWARE IS LIMITED TO REPLACEMENT OR REPAIR
AS SET FORTH IN THIS WARRANTY STATEMENT. FOR CANADIAN
CUSTOMERS, KLIPSCH DISCL AIMS ALL OTHER WARR ANTIES AND
CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR OTHERWISE,
FOR THE PRODUCT. FOR U.S. CUSTOMERS, ALL EXPRESS AND
IMPLIED WARR ANTIES FOR THE PRODUCT, INCLUDING BUT NOT
LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILIT Y
AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED IN TIME
TO THE TERM OF THIS WARRANT Y. SOME STATES, JURISDICTIONS
OR COUNTRIES DO NOT ALLOW THE EXCLUSION OF CERTAIN
IMPLIED WARR ANTIES OR CONDITIONS, OR LIMITATIONS ON
HOW LONG AN IMPLIED WARRANTY OR CONDITIONS LASTS, SO
THIS LIMITATION MAY NOT APPLY TO YOU. KLIPSCH DOES NOT
ACCEPT LIABILITY FOR SPECIA L, INDIRECT, CONSEQUENTIAL OR
INCIDENTAL DAMAGES, INCLUDING WITHOUT LIMITATION, ANY
LIABILIT Y FOR THIRD PART Y CLAIMS AGAINST YOU FOR DAMAGES
OR FOR PRODUCTS NOT BEING AVAILABLE FOR USE. THE MAXIMUM
LIABILIT Y FOR WHICH KLIPSCH MAY BE RESPONSIBLE WILL BE NO
MORE THAN THE AMOUNT YOU PAID FOR THE PRODUCT THAT IS
THE SUBJECT OF THE CL AIM. SOME STATES, JURISDICTIONS OR
COUNTRIES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF
SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES,
SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.
Warranty Outside the U.S. and Canada
The Warranty on this product if it is sold to a consumer outside of the
United States and Canada shall comply with applicable law. To obtain
any applicable warranty service, please contact the dealer from which
you purchased this product, or the distributor that supplied this product.
Security
Eyelet

Termékspecifikációk

Márka: Klipsch
Kategória: hangszóró
Modell: AWR-650-SM

Szüksége van segítségre?

Ha segítségre van szüksége Klipsch AWR-650-SM, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók hangszóró Klipsch

Klipsch

Klipsch Synergy KSB-S1 Útmutató

3 Április 2025
Klipsch

Klipsch Synergy KSF-10.5 Útmutató

3 Április 2025
Klipsch

Klipsch kO-R1 Útmutató

3 Április 2025
Klipsch

Klipsch Synergy SB-1 Útmutató

3 Április 2025
Klipsch

Klipsch Reference RB-5 II Útmutató

3 Április 2025
Klipsch

Klipsch Contractor CS-800-R Útmutató

3 Április 2025
Klipsch

Klipsch Synergy SC-1 Útmutató

3 Április 2025
Klipsch

Klipsch Synergy SC-3 Útmutató

3 Április 2025
Klipsch

Klipsch Reference RC-3 II Útmutató

3 Április 2025
Klipsch

Klipsch Synergy SS-3 Útmutató

3 Április 2025

Útmutatók hangszóró

Legújabb útmutatók hangszóró

Behringer

Behringer B2520 PRO Útmutató

10 Április 2025
Marshall

Marshall Willen Útmutató

10 Április 2025
JBL

JBL Control 426LP Útmutató

9 Április 2025
Crestron

Crestron SAROS IC8T Útmutató

8 Április 2025
LD Systems

LD Systems STINGER G3 TMB Útmutató

8 Április 2025
JBL

JBL Conceal C83 Útmutató

8 Április 2025
Crestron

Crestron SAROS ICE4T Útmutató

7 Április 2025
Crestron

Crestron SAROS ICI6T Útmutató

7 Április 2025
Focal

Focal K2 Power M FRAK Útmutató

5 Április 2025
Match

Match UP C42BMW-FRT.3 Útmutató

3 Április 2025