Használati útmutató Kodak Scan Station 710
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Kodak Scan Station 710 (2 oldal) a Scanner kategóriában. Ezt az útmutatót 17 ember találta hasznosnak és 9 felhasználó értékelte átlagosan 4.4 csillagra
Oldal 1/2

Troubleshooting
User Reference Guide
Kodak Alaris Inc.
2400 Mount Read Blvd.
Rochester, NY 14615
A-61807 / Part #5K3805 September 2014
© 2014 Kodak Alaris Inc.
All rights reserved.
The Kodak trademark and trade dress are used
under license from Eastman Kodak Company
Using the Scan Station 700 Series
Service & Support
www.kodakalaris.com/go/disupport
1.800.822.1414
(US&C only: all other regions, contact your local Support Center)
When contacting support, have the following available:
• A description of your problem
• Scan Station serial number
Multifeeds
If the Scan Station is configured to when a multifeed occurs:Stop Scanning
• The Scan Station will beep and stop feeding documents. The multifeed document
will exit the Scan Station. A message will be displayed to or . TheScan Cancel
multifeed document will not generate an image. If you want to rescan the document,
put the document back in the input tray and touch .Scan
If the Scan Station is configured to when a multifeed occurs:Continue Scanning
• The Scan Station will beep and continue scanning. The multifeed document will be
imaged.
Clearing a paper jam
IMPORTANT: Be sure the output tray is lowered before opening the cover. Do not pull
the jammed document out of the Scan Station; open the Scan Station cover first.
1. Open the Scan Station cover.
2. Remove any jammed document(s), close the Scan Station cover and resume scanning.

1 2
3 4
Getting the Scan Station ready to scan
1 2
Scanning
Getting your documents ready to scan
Scan Station 700 Series
Adjust side guides.
Be sure Scan Station is on and ready.
Be sure output tray panel is down. Adjust input and output tray extenders. Place documents top down in the input tray.
Select the desired job.
You may be prompted with additional
options (e.g., voice annotation, email
subject, etc.)
Your Scan Station may have been configured
to allow you to change or create addtional
settings, if so additional options will be
available on the touchscreen. See your
System Adminstrator for more information.
Before scanning:
• Remove all staples and paper clips.
• All inks and correction fluids on the paper must be dry.
Termékspecifikációk
Márka: | Kodak |
Kategória: | Scanner |
Modell: | Scan Station 710 |
Szüksége van segítségre?
Ha segítségre van szüksége Kodak Scan Station 710, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók Scanner Kodak
6 Október 2024
12 Szeptember 2024
29 Augusztus 2024
28 Augusztus 2024
10 Augusztus 2024
8 Augusztus 2024
6 Augusztus 2024
5 Augusztus 2024
5 Augusztus 2024
3 Augusztus 2024
Útmutatók Scanner
- Scanner 3DMAKERPRO
- Scanner Ricoh
- Scanner Targus
- Scanner Minolta
- Scanner Fujitsu
- Scanner Ambir
- Scanner ICarsoft
- Scanner Kensington
- Scanner Honeywell
- Scanner Yupiteru
- Scanner AVerMedia
- Scanner Scan Dimension
- Scanner Canon
- Scanner Jay-Tech
- Scanner Newland
Legújabb útmutatók Scanner
30 Március 2025
13 Január 2025
12 Január 2025
12 Január 2025
11 Január 2025
31 December 2025
30 December 2025
23 December 2024
15 December 2024
15 December 2024