Használati útmutató Kramer SID-DVI

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Kramer SID-DVI (2 oldal) a AV hosszabbító kategóriában. Ezt az útmutatót 19 ember találta hasznosnak és 6 felhasználó értékelte átlagosan 4.0 csillagra

The Kramer SID- DVI Step-In Commander DVI

Congratulations on purchasing your Kramer DigiTOOLS

® SID-DVI DVI Step-In

Commander which is ideal for boardrooms and presentation rooms.

The Kramer is a and unbalanced stereo audio remote control commander SID-DVI DVI

that is used to remotely take control of a compatible switcher, for example, the

VP-81SID. The commander is HDCP compliant and does not need a power adapter if

located within 50m (1ft) of the switcher. 64

Figure 1Table 1 and define the . SID- DVI DVI Step-In Commander

Figure 1SID-DVI DVI Step-In Commander Front and Rear Panel :

Table 1SID-DVI DVI Step-In Commander Front and Rear Panel Features :

#

Feature

Function

1

AUDIO INPUT3.5mm Mini Jack

Connect to the unbalanced stereo audio source

2

DVI INPUT DVI Connector

Connect to the DVI video source

3

STEP Button IN

Press to switch the input to this remote control commander. The

button lights when active

4

ON LED

Lights green when the unit receives power

5

LINE OUTTwisted Pair RJ-45

Connector

Connect to the TP input of a compatible switcher (for example,

the VP-81SID) using CAT 6 or higher specification cable

6

Remote Switch Terminal Block

Connections (pins 2 and 3)

Connect to the remote step-in switch

7

12V DC Power Connector

Connect to the power adapter

8

Remote LED Terminal Block

Connections (pins 1 and 3)

Connect to the remote LED (observe correct polarity, pin 1 to the

LED anode and pin 3 to the cathode) )

Figure 2 shows the wiring connections of the SID-DVI.

Figure 2SID-DVI Wiring Connections :

To connect the SID- as illustrated in : DVIFigure 2

1. Connect the DVI video sourc(for example, a computer graphics sourceto the e )

D connector on the front panel of the VISID-DVI.

2. Connect the unbalanced stereo audio source (for example, a computer graphics

source) to the 3.5mm mini jack AUDIO INPUT connector on the front of the

SID-DVI.

3. Using STP cable, connect the LINE OUT RJ-45 connector on the rear panel of the

SID- -81SIDDVI to one of the inputs on the rear panel of the VP (up to 50m away).

4. OptionalConnect the terminal block on the rear of the to the remote —SID-DVI

switch and LED.

Note: The LED supply includes a current limiting resistor and is designed to work

with any standard LED.

5. Connect the power adapter to the 12V DC connector on the rear of the SID-DVI

and to the mains electricity (if the distance exceeds 50m (ft) from the switcher). 164

Termékspecifikációk